JBM 54482
30 L Ultrasonic Cleaner
for Mechanical Components and Parts

JBM 54482 - 30 L Ultrasonic Cleaner for Mechanical Components and Parts

The JBM 54482 is a 30L Ultrasonic Cleaner designed to effectively remove dirt, oily residues, grease, scale, and contaminants from mechanical components, tools, metal parts, and objects with particularly complex geometries. Thanks to the combination of a large 30L tank, a 40 kHz ultrasonic frequency, and 10 high-performance transducers, this device ensures uniform and thorough cleaning even in the most difficult-to-reach areas with traditional methods.

Designed for mechanical workshops, technical laboratories, manufacturing companies, and industrial maintenance professionals, the JBM 54482 professional ultrasonic cleaner uses ultrasonic cavitation to eliminate impurities without damaging treated surfaces. The system also features convenient temperature control up to 80°C and an adjustable timer from 1 to 60 minutes, allowing you to customize the cleaning cycle based on the material and level of contamination of the part.

Functional Specifications

High Precision Ultrasonic Cleaning

The system uses 40 kHz ultrasonic waves that, transmitted into the cleaning liquid, generate millions of microscopic bubbles through the cavitation process. The controlled implosion of these bubbles produces an extremely effective cleaning action that removes dirt, residue, and contaminants even from cavities, holes, grooves, and hard-to-reach surfaces.

30 Litre Professional Tank

The generous 30-liter tank capacity allows for the simultaneous treatment of large components or multiple pieces in a single wash cycle. The tank's internal dimensions allow for the insertion of mechanical parts, equipment, and industrial tools, reducing operating times and increasing productivity.

Integrated Heating System

The device is equipped with a 500W heating system that allows the washing liquid to heat up to 80°C. The increased temperature improves the effectiveness of detergents and helps remove grease, oils, and particularly stubborn residues, optimizing the cleaning process.

Adjustable Timer for Custom Cycles

The control panel features an adjustable timer from 1 to 60 minutes, allowing the operator to set the most suitable treatment time based on the type of workpiece and the level of dirt. This feature ensures maximum operational flexibility and consistent results.

Ten High Performance Transducers

The 10 ultrasonic transducers installed inside the machine ensure uniform distribution of sound waves throughout the tank. This allows for uniform cleaning of the entire load, avoiding less-treated areas and improving the overall efficiency of the process.

SUS304 Stainless Steel Frame

The SUS304 stainless steel construction offers high resistance to corrosion, chemicals, and the wear and tear typical of professional environments. This feature ensures long operating life and maximum reliability even under intensive use.

Component Support Basket

The cleaner comes with a handy basket that allows you to properly position the components inside the tank. This solution makes loading and unloading easier, while also protecting the bottom of the tank from any impacts.

Technical Specifications

The JBM 54482 is powered by a 200-240V 50Hz power supply and features 600W of ultrasonic power, supported by 500W of heating power. The system generates ultrasonic waves at a frequency of 40 kHz, the ideal value for achieving the perfect balance between cleaning power and gentleness on treated surfaces. The built-in timer allows you to adjust cycles from 1 to 60 minutes, while the temperature control allows you to operate within a range of 0°C to 80°C.

The machine features a 30 L tank made of SUS304 stainless steel, with internal dimensions of 50 x 30 x 20 cm. The overall dimensions of the unit are 53 x 33.3 x 34 cm, while its weight is 14.5 kg, ensuring high structural strength without compromising ease of installation. The presence of 10 ultrasonic transducers ensures uniform energy distribution within the tank, improving the effectiveness of the treatment on every immersed component.

Characteristics

• Professional ultrasonic cleaner
• Tank capacity 30 L
• Cavitation cleaning technology
• Ultrasonic frequency 40 kHz
• Ultrasonic power 600W
• Heating power 500W
• 10 high-performance transducers
• Adjustable temperature from 0°C to 80°C
• Timer adjustable from 1 to 60 minutes
• SUS304 stainless steel structure
• Component basket included
• Power supply 200-240V / 50Hz
• Tank dimensions 500 x 300 x 200 mm
• Machine dimensions 530 x 333 x 340 mm
• Weight 14.5 kg
• Ideal for workshops, laboratories and industrial maintenance