LEGENDA
SB/S0 | Basic requirements, open heel |
S1 | Basic requirements, closed heel |
S2 | Upper resistant to water penetration but NO anti-perforation LAMINA |
S3 | Upper resistant to water penetration - Puncture resistant sole - Grooved Sole |
S4 | Class II rubber footwear |
S5 | Class II rubber footwear - Puncture resistant sole - Grooved Sole |
S6 | Shoe resistant to water penetration but NO anti-perforation LAMINA |
S7 | Shoe resistant to water penetration - Puncture resistant sole - Grooved Sole |
LEGENDA
P | Puncture resistant lamina |
E | Energy absorption from the heel |
WR | Water resistant upper |
WRU | Upper resistant to water penetration and absorption |
AN | Protection of the ankle bone |
M | Metatarsal protection |
HRO | Sole resistant to contact with heat 300°C for 1 minute |
HI | Heat insulation up to 150°C |
CI | Cold insulation down to -17°C |
FO | Hydrocarbon resistant sole |
ESD | Protection from electric shocks |
A | Anti-static footwear |
C | Conductive footwear |
CR | Cut resistance |
SRA | Slip resistance on ceramic floor with water and detergent |
SRB | Slip resistance on steel and glycerin floor |
SRC | SRA + SRB combination |
DGUV112-191 | Orthopedic insole adaptation |
SC | Tip abrasion resistance |
LG | Sole with heel detached from the sole for grip on ladder steps |
Sparco Gymkhana Acropolis
High Safety Shoes
ESD S3 SRC HRO cod.07536GSAF
or in 3 rates from 31.00 € with | ||
or in 3 rates from 31.00 € with |
Interior - Nubuck and water-repellent leather
Unisex - Summer / Spring / Autumn
ESD S3 SRC HRO - EN ISO 20345:2022
Sparco Gymkhana Acropolis ESD S3 SRC HRO - High safety shoe
The Sparco Acropolis safety shoes represent an excellent choice for protection at work, offering safety that covers up to the ankle . These work shoes are particularly suitable for indoor use and are made from high-quality materials, including Nubuck and water-repellent suede , making them suitable for a wide range of working environments.
The features of these Sparco work shoes include an Eva midsole and an HRO rubber outsole with TPU reinforcement at the heel , ensuring optimal stability and protection.
Plus, for a touch of personality these shoes come with a second pair of colored laces included.
These Sparco Acropolis 07535GSVF protective shoes from the Gymkhana line fully comply with the EN ISO 20345:2022 standard and are characterized by the degrees of protection:
- S3 which combines the steel toe cap and the waterproofness of the upper with the anti-perforation midsole;
- SRC which represents the resistance to slipping with ceramic floor with water and detergent and with steel and glycerine;
- HRO which indicates resistance to hydrocarbons;
- ESD for resistance to electrical discharges.
Sparco footwear uses Teamwork® technology which optimizes the walking effort produced by the sole of the foot, where the greatest stress is concentrated, returning 70% of the energy produced . Thanks to this technology, Sparco Teamwork safety shoes reduce the tiredness felt at the end of the day, thus improving reflexes and attention to the dangers associated with slipping and tripping. Furthermore, they allow less walking effort and less stress on the back and spine together with the relaxation of the muscles .
MultiGrip sole
The MultiGrip Sole of these Sparco SEB Safety Shoes is made up of a super-light EVA midsole and a rubber tread designed to provide friction on multiple surfaces. The blocks of which it is made are designed to allow greater resistance to slipping while the self-cleaning profiles serve to allow liquids to flow out.
Characteristics
- TIP
in non-magnetic composite, insulating, resistant to 200J. - SOLOTH
Anti-perforation in zero-perforation textile fibre. - SOLE
EVA midsole and HRO nitrile rubber outsole with energy absorption on the heel. - REMOVABLE INSOLE
antistatic in soft polyurethane with ergonomic thermoforming. - INNER LINING
Breathable micro-perforated 3D fabric - UPPER
Water-repellent nubuck and suede. - AVAILABLE MEASUREMENTS/SIZES
36-48 - MONDOPOINT DIMENSION
11 - Second pair of colored laces included
Size Comparison Table
Guide to the correct interpretation of protection classes and standards
* highlighted it is possible to identify the characteristics that distinguish the shoes in question Sparco Gymkhana Chester ESD S3 SRC HRO
All safety shoes for professional use compliant with EN ISO 20345:2022 are characterized by the following words:
- S : Safety Shoes (from the English word Safety)
- B : when the letter S follows, it indicates Basic protection. These Mandatory Basic Requirements include the minimum indications to be respected regarding:
- the height of the "split" leather upper which can also be opened in the heel area
- the minimum length and supporting base of the tip
- similar microfibre
- front lining
- insole
- sole that can be made of any type of material.
- P: Protection shoes with protective toe cap (from the English word Protection) safe against impacts with energy of 100 J and compression 10 kN
As regards foot protection, footwear classified as "S" is further divided into:
- SB : is the basic protection level, less protective than the other levels and is equipped with a 200 Joule steel toe cap to protect the fingers, meeting the main safety requirements of the EN 345 standard.
- S1 : S1 level shoes, in addition to the steel toe, also have an antistatic sole with energy absorption in the heel area. The shoes falling into this category are suitable for workers who are not particularly at risk and do not foresee risks for the sole of the foot as this area does not have an anti-puncture plate. If you want to buy a shoe of this level but with an anti-puncture midsole then you can choose the S1P version.
Main features :
- closed back (even in flat shoes)
- Antistatic
- FO: resistance to hydrocarbons of the sole
- Energy absorption capacity of the heel - S2 : this level, in addition to the characteristics of the S1, also has a slight waterproofness given by a leather upper (or similar materials) capable of resisting water permeability for max. 60 minutes.
Main features integrated into the basic requirements :
- Dynamic waterproofing of the upper material - S3 : this is the most widespread level and combines the characteristics of the S1 and S2 levels (steel toe cap and waterproofness) in a single shoe, however adding the anti-puncture plate (steel, fabric or Kevlar) to protect the sole of the foot.
Main features integrated into the basic requirements :
- Anti-puncture plate
- Sole with lugs or grooves - S4 : this is the most waterproof level ever, with a 100% waterproof level in any external condition and for an unlimited time.
Main features integrated into the basic requirements :
- Antistatic
- Energy absorption from the heel
- FO resistance to hydrocarbons - S5 : is the version of S4 with the addition of the anti-perforation plate
Main features integrated into the basic requirements:
- Puncture-proof foil
- Sole with lugs or grooves
Slip resistance classes
Also regarding the anti-slip level of work shoes we have three different classes all complying with the EN 13287 (2012) standard:
- SRA : slip resistance with ceramic floor with water and detergent
- SRB: slip resistance with steel and glycerine floor
- SRC: slip resistance with both of the above conditions
Shoe classification based on risk assessment
The potential risks prevented by safety shoes are also characterized by acronyms that identify which risk protection is ensured from :
E = Heel strike shock
A = Electrostatic discharges
WRU = Upper resistant to water absorption and penetration
WR = Overall footwear resistant to water absorption and penetration
P = Perforation
FO = Hydrocarbons
I = Electrically isolated
CI = Cold
HI = High temperatures
C = Electrical conductivity
M = Protected metatarsal
AN = Ankle protected
CR = Cut
HRO = Heat by contact
ESD: Resistance to Electrical Discharges
Technical data
Item | 07536GSAF |
Protection Class | ESD S3 SRC HRO |
EU regulation | EN ISO 20345:2022 |
Upper | Water-repellent nubuck and suede |
Tip | Non-magnetic composite |
Anti-perforation | Zero Perforation Textile Fiber |
Insole cover | Antistatic in thermoformed PU |
Sole | Eva and Nitrile Rubber |
Season | Summer / Spring / Autumn |
Measures | 36-48 |
Weight Tag.42 | approx. 480 g |
Technical data
Item | 07536GSAF |
Protection Class | ESD S3 SRC HRO |
EU regulation | EN ISO 20345:2022 |
Upper | Water-repellent nubuck and suede |
Tip | Non-magnetic composite |
Anti-perforation | Zero Perforation Textile Fiber |
Insole cover | Antistatic in thermoformed PU |
Sole | Eva and Nitrile Rubber |
Season | Summer / Spring / Autumn |
Measures | 36-48 |
Weight Tag.42 | approx. 480 g |