Base TWINKLE S3 HRO CI HI SRC
Welding Safety Shoes

Base TWINKLE S3 HRO CI HI SRC - Welding Safety Shoes

TWINKLE work shoes with S3 HRO CI HI SRC safety protection which includes, according to EN ISO 20345:12:

• antistatic sole
• energy absorption in the heel area
• light waterproofing of the upper
• anti -perforation steel plate
• Sole resistant to contact with heat 300°C for 1 minute
• Cold insulation down to -17°C
• Heat insulation up to 150°C
• Slip resistance
• 200 Joule tip crush protection
• Sole resistant to hydrocarbon oils

TWINKLE CA-B0899-CWA are made with a 3D technical fabric lining that allows maximum breathability and is antibacterial , thus reducing the risk of infections and fungi.

The toe cap of these safety shoes is Metal Free , with a reduced thickness at the tip of 6.5 mm, 35% less than standard work shoes. TWINKLE shoes equipped with 0 mm perforation ballistic fabric insert.

These original Base Protection safety shoes model TWINKLE B0899 are 4 seasons and comply with the EN ISO 20345:12 standard .

Characteristics

• TOE CAP
  Slim cap
  
• SOLE
  Airtech Bi-density Pu/Hro rubber
  
• LINING
  SmellStop anti-odour and antibacterial
  
• UPPER
  Oiled Water Repellent Leather
• INSERT
  Fresh'n flex
• SIZES/SIZES AVAILABLE
  39-48
• MONDOPOINT SIZE
  12 (men's fit - sizes ≥ 39)

Recommended area of use

• Welding

This original Base protective shoe features the following patented Base Protection® technologies:

Smell Stop® system

The 3D thermal fabric lining ensures maximum breathability while the permanent antibacterial system reduces the risk of infections and fungi by definitively counteracting the proliferation of bad smells.
The antibacterial treatment is effective throughout the life cycle of the safety shoes, performing a constant action.

SlimCap

The Metal Free toe cap of this original Base Protection TWINKLE CA-B0899-CWA shoe has a reduced thickness at the tip of 6.5 mm , 35% less than standard work shoes on the market. This toe cap also features a perfectly contoured toe cap designed to prevent soreness and pressure on the toes.

Fresh'n Flex

TWINKLE work shoes equipped with ballistic fabric insert with 0 mm perforation according to EN ISO 20345:2012 standard.

Size Comparison Table

Guide to the correct interpretation of protection classes and standards

All safety shoes for professional use in accordance with EN ISO 20345:2022 are identified by the following wordings:

• SB (ex standard S0): Basic Protection
• S1 (ex standard 01): antistatic sole with energy absorption in the heel area
  • S1: They have no anti-puncture plate
  • S1P: They have anti-perforation plate in steel
  • S1PL: Have Metal Free anti-perforation foil for 4.5mm nails (Large)
  • S1PS: They have Metal Free anti-perforation plate for 3 mm nails (Small)
• S2 (ex standard 02): S1 + light impermeability given by an upper in leather (or similar materials) able to resist the permeability of water for max. 60 minutes.
• S3 (ex standard 03): S2 + anti-perforation plate
  • S3: They have anti-perforation plate in steel
  • S3L: Have Metal Free anti-perforation foil for 4.5 mm nails (Large)
  • S3S: They have Metal Free anti-perforation plate for 3 mm nails (Small)
• S4 : WRU water resistance
• S5 : S4 + anti-perforation plate
  • S5: They have anti-perforation plate in steel
  • S5L: Have Metal Free anti-perforation foil for 4.5 mm nails (Large)
  • S5S: They have Metal Free anti-perforation plate for 3 mm nails (Small)
• S6 : EXTRA Water Resistance (WR)
  • S6: They do not have anti-puncture plate
  • S6P: They have anti-perforation plate in steel
  • S6L: Have Metal Free anti-perforation foil for 4.5mm nails (Large)
  • S6S: Have Metal Free anti-perforation plate for 3 mm nails (Small)
• S7: S6 + anti-perforation plate
  • S7: They have anti-perforation plate in steel
  • S7L: Have Metal Free anti-perforation foil for 4.5 mm nails (Large)
  • S7S: Have Metal Free anti-perforation plate for 3 mm nails (Small)

Slip resistance classes - standard EN 13287 (2012):

• SRA : slip resistance with ceramic floor with water and detergent
• SRB: slip resistance with steel and glycerine floor
• SRC: SRA + SRB

Risk protection - standard 20345:2022:

P - Puncture resistant foil
E - Energy absorption from the heel
WR - Water Resistance (it is the improvement of the WRU)
WRU - Upper resistant to water penetration from 2023 WRU will be called WPA
AN - Malleolus protection
M - Metatarsal protection
HRO - Sole resistant to heat contact 300°C for 1 minute
HI - Heat insulation up to 150°C
CI - Cold insulation up to - 17°C
FO - Hydrocarbon resistant sole
ESD - Protection from electric shock
A - Electrostatic footwear
C - Conductive footwear (electricity)
CR - Cut Resistance
SRA - Slip resistance with ceramic floor with water and detergent
SRB - Slip resistance with steel and glycerine floor
SRC - Combination of SRA + SRB
DGUV112-191 - Orthopedic insole adaptation
SC - Toe Abrasion Resistance
LG - Sole with heel detached from the plant for grip on ladder rungs