Base NATRIUM S2 SRC
Shoe for Food Industry

Base NATRIUM S2 SRC - Safety Shoe for the Food Industry

Base Protection work shoes model NATRIUM with S2 SRC protection ideal for use in the food industry and in sectors that require compliance with particular hygiene standards . This BASE NATRIUM S2 SRC safety shoe protects the foot from wet thanks to the WRU waterproofing of the upper , it is also equipped with an antistatic sole and energy absorption in the heel area.
The wording SRC instead indicates the resistance to slipping on the ground.

The Base Natrium S2 SRC safety shoe is equipped with a sole resistant to hydrocarbon oils , with a puncture resistant laminate to ensure maximum comfort and maximum protection for the user.

These original Base NATRIUM safety shoes fully comply with the EN ISO 20345:12 standard.

The SlimCap toe with which the NATRIUM CA-B0980-0WA Base shoe is equipped has a thickness reduced by 35% compared to the market standard. The Base Natrium shoe is equipped with a perfectly shaped protective band at the toe , to prevent pressure and pain on the toes.

The flexible and light anti-fatigue sole adapts to any type of surface, with high slip resistance.

Characteristics

• TOE CAP
  SlimCap - Non-metallic
  
• SOLE
  AirTech monodensity anti-fatigue
  
• INNER LINING
  SmellStop anti-odour and antibacterial
  Breathable 3D technical fabric
  
• UPPER
  Water repellent microfiber
• SIZES/SIZES AVAILABLE
  35-48
• MONDOPOINT SIZE
  12 (men's fit - sizes ≥ 39)
  10.5 (women's fit - sizes < 39 )

Recommended area of use

• Indoor
• Food industry

This original Base protective shoe features the following patented Base Protection® technologies:

Smell Stop® system

The 3D thermal fabric lining ensures maximum breathability while the permanent antibacterial system reduces the risk of infections and fungi by definitively counteracting the proliferation of bad smells.
The antibacterial treatment is effective throughout the life cycle of the safety shoes, performing a constant action.

AirTech

It is a flexible and light anti-fatigue sole with high slip resistance able to adapt to any type of surface.

Size Comparison Table

Guide to the correct interpretation of protection classes and standards

All safety shoes for professional use in accordance with EN ISO 20345:2022 are identified by the following wordings:

• SB (ex standard S0): Basic Protection
• S1 (ex standard 01): antistatic sole with energy absorption in the heel area
  • S1: They have no anti-puncture plate
  • S1P: They have anti-perforation plate in steel
  • S1PL: Have Metal Free anti-perforation foil for 4.5mm nails (Large)
  • S1PS: They have Metal Free anti-perforation plate for 3 mm nails (Small)
• S2 (ex standard 02): S1 + light impermeability given by an upper in leather (or similar materials) able to resist the permeability of water for max. 60 minutes.
• S3 (ex standard 03): S2 + anti-perforation plate
  • S3: They have anti-perforation plate in steel
  • S3L: Have Metal Free anti-perforation foil for 4.5 mm nails (Large)
  • S3S: They have Metal Free anti-perforation plate for 3 mm nails (Small)
• S4 : WRU water resistance
• S5 : S4 + anti-perforation plate
  • S5: They have anti-perforation plate in steel
  • S5L: Have Metal Free anti-perforation foil for 4.5 mm nails (Large)
  • S5S: They have Metal Free anti-perforation plate for 3 mm nails (Small)
• S6 : EXTRA Water Resistance (WR)
  • S6: They do not have anti-puncture plate
  • S6P: They have anti-perforation plate in steel
  • S6L: Have Metal Free anti-perforation foil for 4.5mm nails (Large)
  • S6S: Have Metal Free anti-perforation plate for 3 mm nails (Small)
• S7: S6 + anti-perforation plate
  • S7: They have anti-perforation plate in steel
  • S7L: Have Metal Free anti-perforation foil for 4.5 mm nails (Large)
  • S7S: Have Metal Free anti-perforation plate for 3 mm nails (Small)

Slip resistance classes - standard EN 13287 (2012):

• SRA : slip resistance with ceramic floor with water and detergent
• SRB: slip resistance with steel and glycerine floor
• SRC: SRA + SRB

Risk protection - standard 20345:2022:

P - Puncture resistant foil
E - Energy absorption from the heel
WR - Water Resistance (it is the improvement of the WRU)
WRU - Upper resistant to water penetration from 2023 WRU will be called WPA
AN - Malleolus protection
M - Metatarsal protection
HRO - Sole resistant to heat contact 300°C for 1 minute
HI - Heat insulation up to 150°C
CI - Cold insulation up to - 17°C
FO - Hydrocarbon resistant sole
ESD - Protection from electric shock
A - Electrostatic footwear
C - Conductive footwear (electricity)
CR - Cut Resistance
SRA - Slip resistance with ceramic floor with water and detergent
SRB - Slip resistance with steel and glycerine floor
SRC - Combination of SRA + SRB
DGUV112-191 - Orthopedic insole adaptation
SC - Toe Abrasion Resistance
LG - Sole with heel detached from the plant for grip on ladder rungs