| IP | First digit – Protection against solid objects | Second digit – Protection against water |
|---|---|---|
| 0 | No protection | No protection |
| 1 | Solid objects ≥ 50 mm | Vertical dripping |
| 2 | Solid objects ≥ 12.5 mm | Dripping when tilted (15°) |
| 3 | Solid objects ≥ 2.5 mm | Water spray |
| 4 | Solid objects ≥ 1 mm | Water splashes |
| 5 | Dust protected (partial) | Water jets |
| 6 | Dust tight | Powerful water jets |
230V - 1.3 kW
IPX5
Indoor/Outdoor - Gold Light
Varma SPOT is a professional infrared radiant heater, Made in Italy, designed for the localized heating of homes, offices, basements, beauty salons, and changing rooms. With a power of 1300 W, it offers immediate and targeted heat in areas up to 10 / 12 m². The main feature of this infrared heater is its production of immediate heat, allowing for reduced preheating costs. The use of Varma Tec heaters also allows for the division of the system into multiple zones, with the possibility of setting different operating temperatures if necessary.
The patented IPX5 protection makes it resistant to rain and water splashes, thus suitable for outdoor use as well. The wall-mountable adjustable model is an excellent wall-mounted heater for those seeking efficient, silent, and dust-free infrared heating.
Varma heaters are professional Made in Italy products with high technological content, built with top-quality materials.
These characteristics allow us to offer heaters with maximum reliability, high efficiency, and long lifespan.

Varma SPOT heaters are the result of extensive research in the field of infrared heating, leading to products that offer solar-quality heat, a comfortable environment, without noise or dust, and with significant energy savings. They can be installed in various ways, both on walls and on mobile stands; wall installation is the most common and allows for non-intrusive placement of the heaters in the room. Ceiling installations are generally not recommended as they only heat the upper body; if a ceiling solution is necessary, heating should be diagonal as shown in the photo below. The heaters are supplied with all necessary accessories for mounting and aiming.
The affected area varies based on the installation height, environmental conditions, and the synergy achieved through the installation of multiple heaters; multiple installations generally lead to significantly superior results. During installation, it should be considered that horizontal installations widen the coverage area, while vertical installations concentrate the coverage but with greater intensity.


Varma SPOT operates with a 230 V - 50 Hz power supply and consumes 1300 W of power. The structure is made of die-cast aluminum, with a parabolic reflector that optimizes the output of short-wave infrared rays. It can be used both indoors and outdoors, with IPX5 waterproof protection class. The package includes a 3-meter power cable with a Schuko plug, a protective grille, and a wall mounting bracket.
The heated area is 10-12 m², with a recommended installation height of 1.90 to 2.20 m.
Varma Tec equipment is developed and produced in Italy using cutting-edge technologies and following thorough studies and tests; thanks to all this, Varma is able to offer products with unparalleled quality and reliability, recognized in international markets. All Varma heaters must pass specific tests before leaving the factory, both during production and before shipment.
Varma radiant heaters optimize the refraction of short-wave infrared rays through reflectors; these special reflectors optimize the performance of infrared rays, utilizing different parabolic curvatures depending on the application sectors. This leads to high performance and energy savings.

Compared to gas and air heating systems, Varma products allow for simple installation and targeted distribution of heat sources. This leads to several advantages:


It is possible to select the version including the Demospot telescopic stand, with adjustable height up to 180 cm.
| Use | Indoor / Outdoor |
| Mounting | Wall |
| Protection | IPX5 |
| Power Supply | 230 V - 50 Hz |
| Power | 1300 W |
| Heated Area | 10 - 12 m² |
| Recommended Installation Height | 1.90 - 2.20 m |
| Cable Length | 3 m |
| Dimensions | 41 x 14 x 12 cm |
| Weight | 0.95 kg |
Our workshop is able to guarantee efficient and professional repairs: speed of intervention, competence and availability are our strengths.
By purchasing from Indors you will also have purchased peace of mind: our Assistance and Repairs Service guarantees quick and timely solutions for any problem thanks to the safe availability of spare parts, your equipment will always be efficient and available within a few days at a low cost. More information
All products sold by Indors are covered by the European legal warranty for lack of conformity pursuant to Articles 128 et seq. of Legislative Decree No. 206/2005. The warranty is valid starting from the date of purchase. Professional users are entitled to a 12-month warranty.
More information