Haze HZY12-65EV
12V 75Ah Gel Battery for Electric and Professional Vehicles
12V - 61.1÷75 Ah
Number of cycles 700
Full Gel Lead
Haze HZY12-65EV - 12V 75Ah Gel Battery for Electric and Professional Vehicles
The Haze HZY12-65EV battery is a professional lead-acid solution with Full Gel technology, designed for industrial applications and electric vehicles that require high performance and reliability over time. Able to withstand up to 700 charging cycles , it ensures stable and continuous performance even in the most intensive uses. The compact dimensions of 27.2 x 16.5 x 18.8 cm allow for practical and flexible installation, ideal for spaces with limited overall dimensions. The structure is developed to operate safely in a temperature range of -20°C to +50°C , ensuring operational continuity even in challenging environmental conditions. Entirely Made in Italy , this battery represents a reliable and quality choice for professionals and operators in the sector.

FUNCTIONAL SPECIFICATIONS
Advanced and Reliable Full Gel Technology
The Haze HZY12-65EV uses the latest-generation Full Gel technology, based on immobilized electrolyte, Amersil microporous separators, and Degussa amorphous silica gelling agent. This construction eliminates the risk of leaks and guarantees a higher level of safety than traditional lead-acid batteries. The flat plates with a kneaded grid, combined with the use of ultra-pure lead, allow for consistent performance even during intensive use cycles.

Energy Capacity and Charging Cycles
Designed for continuous industrial applications, the battery provides a capacity of 61.1 Ah (C5) and 75 Ah (C20) , offering stable and reliable energy delivery over time. The internal structure is optimized to withstand up to 700 charge cycles , maintaining uniform voltage and consistent performance throughout its entire operating life.
Compact Sizes and Industrial Connections
Measuring 27.2 x 16.5 x 18.8 cm and weighing 21.5 kg , the HZY12-65EV can be easily installed even in small spaces. The right-side positive polarity and F-M6 pin configuration allows for quick and safe connections, ensuring compatibility with major industrial electrical systems and simplifying installation.

Charging Parameters and Operational Safety
The battery supports precise charging parameters: float between 2.27 and 2.3 VPC , cyclic charging between 2.35 and 2.4 VPC and a maximum voltage of 2.4 VPC , with ripple less than 3.5% . Safety is further enhanced by an EPDM vent valve and epoxy- sealed terminals, which prevent any electrolyte leakage and ensure reliability even in the most demanding applications.
Construction Quality and Made in Italy
Entirely manufactured in Italy , the HZY12-65EV features a high-strength ABS container and grids made of lead-calcium-tin alloy . The high production standards and careful selection of materials guarantee structural solidity, chemical stability, and long-lasting performance, making this battery a professional and reliable solution for industrial applications.
Why choose a Gel battery?
- Reliable recovery even after deep discharges , without the need for immediate recharging
- Designed for daily use with repeated cycles
- Stable performance over long duration discharges
- Good operation in high temperature environments
- Immobilized electrolyte that eliminates stratification
- Low self-discharge and less maintenance required
- Positive plate protection for longer cycle life
- High charge acceptance due to low internal resistance
- High resistance to water loss with proper refill management
- Highly stable polymer separator , resistant to mechanical stress and short circuits

Areas of Use
- Caravans and Campers
- Floor cleaning machines
- Solar systems
- UPS (Uninterruptible Power Supply)
- Electric vehicles
- Nautical

Dimensions

Characteristics
- Full Gel lead-acid battery
- Nominal voltage 12V
- Capacity 61.1 Ah (C5) / 75 Ah (C20)
- 700 charge cycles for intensive use
- F-M6 poles with positive polarity on the right
- Dimensions 27.2 x 16.5 x 18.8 cm
- Operating temperature from -20°C to +50°C
- High purity materials
- Highly stable polymer separators
- Made in Italy




Standard Equipment
- FM6 Terminal

Optional Equipment
- Pair of M6 conical pole adapters - code 90000012

Technical Data
| Model | HZY12-65EV |
| Typology | Full Gel lead-acid battery |
| Nominal Voltage | 12V |
| Capacity | 61.1 Ah in C5 / 75 Ah in C20 |
| Number of Cycles | 700 |
| Pioli type | F-M6 |
| Polarity | Positive on the right |
| Operating Temperature | -20 ÷ +50 °C |
| Dimensions | 27.2 x 16.5 x 18.8 cm |
| Weight | 21.5 kg |
INDORS is an Authorized Service and Repair Center
Our workshop is able to guarantee efficient and professional repairs: speed of intervention, competence and availability are our strengths.
By purchasing from Indors you will also have purchased peace of mind: our Assistance and Repairs Service guarantees quick and timely solutions for any problem thanks to the safe availability of spare parts, your equipment will always be efficient and available within a few days at a low cost. More information
EU Warranty
All products sold by Indors are covered by the European legal warranty for lack of conformity pursuant to Articles 128 et seq. of Legislative Decree No. 206/2005. The warranty is valid starting from the date of purchase. Professional users are entitled to a 12-month warranty.
More information
On Request Accessories