LTF GSC200-4-1-SE
4-in-1 Multifunction Power Generator

LTF GSC200-4-1-SE - 4-in-1 Multifunction Power Generator

The LTF 4-in-1 multifunction gasoline generator is innovative and versatile. With a single wheeled generator, you will have a welder, a power generator, an air compressor, and a light tower (extendable from 1.8 m to 4.5 m) available, all with excellent performance.

Technical Specifications

GENERATOR

This LTF GSC200-4-1-SE generator can generate a maximum of 5.5 kW of power and work continuously at a nominal power of 5 kW in single-phase current, generating 3000 RPM. It can work for extended periods thanks to its 30 L tank.

Equipped with a recoil or electric start system, this makes it convenient and safe, also thanks to the IP 21S protection class.

The multifunction generator features an AVR voltage regulator, which makes the connection of electronic devices sensitive to voltage and frequency fluctuations more stable, also reducing power drops or surges.

The MDS rectifier system allows for the transformation of an alternating signal into a unidirectional one (positive or negative).

The generator outputs are:

• 1x16A/230V
• 1x32A/230V

WELDER

The MMA welder (electrode welding) can operate in a power range between 50 - 200DC/A with a Duty Cycle (40°) of 50% - 200 A. Thanks to its power, it can use electrodes from Ø 1.6 to 4.0 mm. Operating with a nominal current/voltage of 180 A / 27.2V.

The welder comes with a welding mask, ground clamp, and electrode holder clamp. During the use of the welder, it will not be possible to connect other power tools to the generator as all energy will be occupied in managing the latter.

COMPRESSOR

The compressor is located inside the machine and ensures excellent performance thanks to its large 100 L tank and the ability to intake 100 L/min of air.

This compressor features a 2-stage motor capable of generating 6-8 bar of pressure.

The dimensions are 86 x 60 x 60 cm for 153 kg. Despite its significant footprint, transport is facilitated by the system with large wheels mounted on the machine.

LIGHT TOWER 1.8 m - 4.5 m

Thanks to the presence of the light tower, there is no need to carry an additional tool during work on construction sites, tunnels, and similar locations where portable lighting systems are required for work.

This light tower features a practical telescopic system, allowing for a particularly compact size and an extension range from 1.8 m to 4.5 m, with the possibility of storing it on the machine body in its designated housing.

The light tower is capable of providing ample illumination thanks to its 4 LED lamps of 100 W each.

Upon arrival, before starting, it is necessary to add oil and gasoline.

Features

• MMA Welder
• 100 L Compressor
• Generator with nominal power of 5 kW
• Manual recoil and electric start
• 4 x 100 W LED lamps
• Maximum extension 4.5 m