Base BE-DRY MID B0895S
S3 WR CI HI HRO SRC
Water Repellent Safety Shoes

Base Protection BE-DRY MID - Waterproof Safety Shoes

The BE-DRY MID B0895S Base Protection Safety Shoes are entirely resistant to water penetration thanks to the water-repellent full grain leather upper with H2st0p waterproof membrane which, thanks to the heat-sealed membrane, seals all the seams preventing both the penetration of water and the its accumulation between the upper and the lining.

These Base Protection Safety Shoes are part of the Special Line and have a breathable technical fabric lining that combines thermal insulation with warmth and softness.
The BE-DRY MID CA-B0895-CWS work shoe has a removable Dry'n Air anatomical footbed and is compatible with insoles according to DGUV 112-191.

Base Protection BE-DRY MID complies with the S3 WR CI HI HRO SRC standard and is characterized by:

• Antistatic sole
• Energy absorption in the heel area
• Steel anti-perforation plate
• Protection from electric shocks
• Hydrocarbon resistant sole
• Slip resistance
• Metal Free tip
• 200 Joule tip crush protection
• Sole resistant to contact with heat 300°C for 1 minute
• Cold insulation down to -17°C
• Heat insulation up to 150°C
• Water resistance according to WR and WRU standards
• Orthopedic insole adaptation

These Mondopoint 12 men 's fit Safety Shoes are ideal for the autumn/winter seasons and comply with the EN ISO 20345:12 standard .

Characteristics

• TOE CAP
  Slim cap
  
• SOLE
  Airtech Bi-density Pu/Hro rubber Life Plus technology
  
• LINING
  Primaloft® in breathable technical fabric
  
• UPPER
  Water Repellent Grain Leather With H2st0p Waterproof Membrane
  
• INSERT
  Fresh'n flex
• SIZES/SIZES AVAILABLE
  39-50
• MONDOPOINT SIZE
  12 (men's fit - sizes ≥ 39)

Recommended area of use

• External, outdoors
• You work in extreme conditions
• Heavy industry
• Light industry
• Building
• Logistics
• Agriculture and livestock
• Extractions
• Crafts
• Large distribution
• Services

This original Base protective shoe features the following patented Base Protection® technologies:

H2St0p®

Extreme resistance to water-based fluids allowing to work in constantly wet environments . In fact, the heat-sealed membrane seals all the seams, preventing both the penetration of water and its accumulation between the upper and the lining which would make the shoe heavier.

OMNIA Dry'n Air® system

The Base Protection safety shoes with Dry'n Air System ensure an excellent thermoregulation capacity thanks to the simplified recirculation of the air present inside the work shoe. This innovative system pushes the humidity generated by sweat out of the footwear, improving the internal microclimate and the well-being of the foot, which remains dry and cool even in the presence of high temperatures.
The secret of this technology is a system of channels and holes, always free in an ergonomic insole capable of lifting the foot beyond the edge of the sole by distributing the weight evenly.

Fresh'n Flex system

The Base Protection BE-DRY MID shoe is equipped with a 0 mm perforation ballistic fabric insert according to the EN ISO 20345:2011 standard.

AirTech + Tpu-Skin®

It is an anti-fatigue sole with exclusive technology patented by Base Protection to reduce the thickness of the tread making it less hard and compact, thus giving greater elasticity and a cushioning effect when walking.

SlimCap

The Metal Free toe cap of this Base Protection shoe has a reduced thickness of 6.5 mm, 35% less than standard work shoes on the market. This toe cap also features a perfectly contoured toe cap designed to prevent soreness and pressure on the toes.

PrimaLoft

Lining in breathable technical fabric that combines thermal insulation with characteristics of warmth and softness

Size Comparison Table

Guide to the correct interpretation of protection classes and standards

All safety shoes for professional use in accordance with EN ISO 20345:2022 are identified by the following wordings:

• SB (ex standard S0): Basic Protection
• S1 (ex standard 01): antistatic sole with energy absorption in the heel area
  • S1: They have no anti-puncture plate
  • S1P: They have anti-perforation plate in steel
  • S1PL: Have Metal Free anti-perforation foil for 4.5mm nails (Large)
  • S1PS: They have Metal Free anti-perforation plate for 3 mm nails (Small)
• S2 (ex standard 02): S1 + light impermeability given by an upper in leather (or similar materials) able to resist the permeability of water for max. 60 minutes.
• S3 (ex standard 03): S2 + anti-perforation plate
  • S3: They have anti-perforation plate in steel
  • S3L: Have Metal Free anti-perforation foil for 4.5 mm nails (Large)
  • S3S: They have Metal Free anti-perforation plate for 3 mm nails (Small)
• S4 : WRU water resistance
• S5 : S4 + anti-perforation plate
  • S5: They have anti-perforation plate in steel
  • S5L: Have Metal Free anti-perforation foil for 4.5 mm nails (Large)
  • S5S: They have Metal Free anti-perforation plate for 3 mm nails (Small)
• S6 : EXTRA Water Resistance (WR)
  • S6: They do not have anti-puncture plate
  • S6P: They have anti-perforation plate in steel
  • S6L: Have Metal Free anti-perforation foil for 4.5mm nails (Large)
  • S6S: Have Metal Free anti-perforation plate for 3 mm nails (Small)
• S7: S6 + anti-perforation plate
  • S7: They have anti-perforation plate in steel
  • S7L: Have Metal Free anti-perforation foil for 4.5 mm nails (Large)
  • S7S: Have Metal Free anti-perforation plate for 3 mm nails (Small)

Slip resistance classes - standard EN 13287 (2012):

• SRA : slip resistance with ceramic floor with water and detergent
• SRB: slip resistance with steel and glycerine floor
• SRC: SRA + SRB

Risk protection - standard 20345:2022:

P - Puncture resistant foil
E - Energy absorption from the heel
WR - Water Resistance
WRU / WPA - Upper resistant to water penetration
AN - Malleolus protection
M - Metatarsal protection
HRO - Sole resistant to heat contact 300°C for 1 minute
HI - Heat insulation up to 150°C
CI - Cold insulation up to - 17°C
FO - Hydrocarbon resistant sole
ESD - Protection from electric shock
A - Electrostatic footwear
C - Conductive footwear (electricity)
CR - Cut Resistance
SR - Slip resistance with ceramic floor with water and detergent and with steel floor and glycerine
DGUV112-191 - Orthopedic insole adaptation
SC - Toe Abrasion Resistance
LG - Sole with heel detached from the plant for grip on ladder rungs