Base BE-UNIFORM TOP
Shoes for carpentry

Base BE-UNIFORM TOP - Safety Shoes S3 HRO CI HI SRC

BE-UNIFORM work shoes with S3 HRO CI HI SRC safety protection which includes, according to EN ISO 20345:12:

• Antistatic sole
• Energy absorption in the heel area
• Crush protection with 200 Joule tip
• Cold resistance - 17 °C
• Heat resistance +150°C
• Sole resistant to hydrocarbon oils
• Sole resistant to contact heat at +300°C (1 minute)
  
• Puncture resistant foil
• Water Resistant Upper (WRU)
• Slip resistance
• Orthopedic insole adaptation

BE-UNIFORM B0888N are equipped with a TPU heel area reinforcement and are made with a Smellstop lining that reduces the risk of fungal infections , definitively counteracting the proliferation of bad smells. The shape of this Base Protection safety shoe protects the foot up to the ankle by increasing the protected surface.

The toe cap of these safety shoes is SlimCap , which helps reduce the external dimensions of the footwear up to 35% compared to market standards. The non-metallic SlimCap tip, only 6.5 mm thick , is not only smaller and lighter than those normally used but it is also elastic, non-magnetic and heat insulating .

These Safety Shoes with men 's fit are original Base Protection model BE-UNIFORM TOP CA-B0888-CWB they are 4 seasons and comply with the EN ISO 20345:12 standard .

Characteristics

• TOE CAP
  Slim cap
  
• SOLE
  Airtech Bi-density Pu/Hro rubber Life Plus technology
  
• LINING
  SmellStop anti-odour and antibacterial
  
• UPPER
  Oiled Water Repellent Leather
• INSERT
  Fresh'n flex
• SIZES/SIZES AVAILABLE
  39-48
• MONDOPOINT SIZE
  12 (men's fit - sizes ≥ 39)

Recommended area of use

• Carpentry

This original Base protective shoe features the following patented Base Protection® technologies:

Smell Stop® system

The 3D thermal fabric lining ensures maximum breathability while the permanent antibacterial system reduces the risk of infections and fungi by definitively counteracting the proliferation of bad smells.
The antibacterial treatment is effective throughout the life cycle of the safety shoes, performing a constant action.

SlimCap

The Metal Free toe cap of this original Base Protection BE-UNIFORM TOP shoe has a reduced thickness at the tip of 6.5 mm , 35% less than standard work shoes on the market. This toe cap also features a perfectly contoured toe cap designed to prevent soreness and pressure on the toes.

Fresh'n Flex

BE-UNIFORM TOP B0888N work shoes equipped with ballistic fabric insert with 0 mm perforation according to EN ISO 20345:2012 standard.

Size Comparison Table

Guide to the correct interpretation of protection classes and standards

All safety shoes for professional use in accordance with EN ISO 20345:2022 are identified by the following wordings:

• SB (ex standard S0): Basic Protection
• S1 (ex standard 01): antistatic sole with energy absorption in the heel area
  • S1: They have no anti-puncture plate
  • S1P: They have anti-perforation plate in steel
  • S1PL: Have Metal Free anti-perforation foil for 4.5mm nails (Large)
  • S1PS: They have Metal Free anti-perforation plate for 3 mm nails (Small)
• S2 (ex standard 02): S1 + light waterproofing given by a leather upper (or similar materials) able to resist water permeability for max. 60 minutes.
• S3 (ex standard 03): S2 + anti-perforation plate
  • S3: They have anti-perforation plate in steel
  • S3L: Have Metal Free anti-perforation foil for 4.5 mm nails (Large)
  • S3S: They have Metal Free anti-perforation plate for 3 mm nails (Small)
• S4 : WRU water resistance
• S5 : S4 + anti-perforation plate
  • S5: They have anti-perforation plate in steel
  • S5L: Have Metal Free anti-perforation foil for 4.5 mm nails (Large)
  • S5S: They have Metal Free anti-perforation plate for 3 mm nails (Small)
• S6 : EXTRA Water Resistance (WR)
  • S6: They do not have anti-puncture plate
  • S6P: They have anti-perforation plate in steel
  • S6L: Have Metal Free anti-perforation foil for 4.5mm nails (Large)
  • S6S: Have Metal Free anti-perforation plate for 3 mm nails (Small)
• S7: S6 + anti-perforation plate
  • S7: They have anti-perforation plate in steel
  • S7L: Have Metal Free anti-perforation foil for 4.5 mm nails (Large)
  • S7S: Have Metal Free anti-perforation plate for 3 mm nails (Small)

Slip resistance classes - standard EN 13287 (2012):

• SRA : slip resistance with ceramic floor with water and detergent
• SRB: slip resistance with steel and glycerine floor
• SRC: SRA + SRB

Risk protection - standard 20345:2022:

P - Puncture resistant foil
E - Energy absorption from the heel
WR - Water Resistance (it is the improvement of the WRU)
WRU / WPA - Upper resistant to water penetration since 2023
AN - Malleolus protection
M - Metatarsal protection
HRO - Sole resistant to heat contact 300°C for 1 minute
HI - Heat insulation up to 150°C
CI - Cold insulation up to - 17°C
FO - Hydrocarbon resistant sole
ESD - Protection from electric shock
A - Electrostatic footwear
C - Conductive footwear (electricity)
CR - Cut Resistance
SRA - Slip resistance with ceramic floor with water and detergent
SRB - Slip resistance with steel and glycerine floor
SRC - Combination of SRA + SRB
DGUV112-191 - Orthopedic insole adaptation
SC - Toe Abrasion Resistance
LG - Sole with heel detached from the plant for grip on ladder rungs