Speroni CX 40
Centrifugal Electric Pumps
for Clean Water

Speroni CX 40 - Stainless steel monobloc centrifugal electric pumps

The Speroni CX 40 electric pumps represent an excellent solution for pumping clean liquids. These electric pumps are single-impeller monobloc centrifugal pumps , totally made of stainless steel. Specially designed for pumping clean water and non-chemically and mechanically aggressive liquids , these pumps are versatile and suitable for a wide range of applications, both in the civil and agricultural, industrial and plant sectors.

The CX Speroni electric pumps are equipped with a 2-pole three-phase induction electric motor and are available in different powers that can be selected from the drop-down menu. The Speroni CX 40 range has a delivery diameter of Ø 40 mm and an intake diameter of Ø 65 mm .
Maximum head 65 m with water flow rate of 1100 L/min max with manometric suction height up to 7 m .

These Speroni CX 40 electric pumps have three-phase power and 230/400V-50 Hz connection in models with nominal power less than or equal to 7.5 kW or 400/690V-50Hz connection in models with nominal power greater than 7.5 kW.

Models available

Selectable from the drop-down menu:

• Spurs CX 40-125/2,2 cod. 101810133 - power 3 HP
• Spurs CX 40-125/3 cod. 101810143 - power 4 HP
• Spurs CX 40-160/4 cod. 101810173 - power 5.5 HP
• Spurs CX 40-200/5.5 cod. 101810203 - power 7.5 HP
• Spurs CX 40-200/7.5 cod. 101810213 - power 10 HP
• Spurs CX 40-200/11 cod. 101810223 - power 15 HP

Functional specifications

The CX 40 Speroni electric pumps can be installed in any position (with the exception of the one with the suction mouth facing upwards), making their use easy in various activities. Furthermore, these monobloc centrifugal electric pumps have a construction form that allows the extraction of the motor complete with rotating parts of the pump and subsequent reassembly without removing the pump body or the pipes connected to it.

Limitations of use

• Liquid temperature up to 35°C
  (for domestic use according to EN 60335-2-41)
  Max. temperature liquid: 90°C (for other uses)
• Ambient temperature up to 40°C
• Manometric suction height up to 7 m.
• Continuous service

Materials

• Pump course: AISI 304 stainless steel
• AISI 304 stainless steel seal holder flange
• Impeller: AISI 304 stainless steel
• Motor shaft: AISI 304 stainless steel
• Mechanical seals: Ceramic / Graphite / NBR

Motor

• Three-phase 230/400V-50Hz P2 ≤ 7.5 kW
• Three-phase 400/690V-50Hz P2 > 7.5 kW
• 2-pole induction electric motor (n = 2850 min-1)
• Class F insulation
• IP 55 protection

Areas of use

• Water supplies
• Rain or flow irrigation
• Autoclave supplies and pressure increases
• Heating and air conditioning
• Any other use that involves the transfer of clean liquids in general
• Civil field
• Agricultural field
• Industrial field
• Plant engineering field in general