Alphabetical IndexBrands
Close
Fral FD240TCR
Industrial Dehumidifier
With external condenser
MPN: FD240TCR
400V - 4.3kW
2000 m³/h - 55 dB -240 L/24 h
For Industry - Continuous Discharge
Warranty 2 years
14 days to change your mind
Shipped on Pallet
Fral FD240TCR - Dehumidifier with External Condenser
Fral FD240TCR belongs to the industrial dehumidifiers with external condenser that allows dehumidification combined with cooling, performing simultaneous control of humidity and temperature. The Fral FD240TCR dehumidifier is suitable for use in environments where it is necessary to control humidity and temperature.
Fral FD240TCR is equipped with a mechanical dehumidifier on board the machine, with a digital thermostat for temperature control
The Fral FD TCR series dehumidifiers are equipped with a hot gas defrosting system (optional) , with electronic and thermostatic control. They can work up to temperatures close to 0 °C.
How a dehumidifier works
A dehumidifier is a machine that sucks in air and filters it. The air passes through a radiator filled with refrigerant gas . The low temperature condenses the humidity present, collecting the waste liquid in a tank. Fral FD240TCR recirculates the filtered and humidity-free air through the action of a fan .
Functional specifications
Sturdy structure in galvanized sheet metal
The load-bearing structure of Fral FD240TCR is composed of panels in sturdy hot-dip galvanized sheet metal , painted with epoxy powders . These guarantee high resistance to atmospheric agents and aggressive environments . The panels of this Fral industrial dehumidifier are removable , which allows for quick inspection and maintenance of the internal elements.
Scroll compressor
The compressor inside Fral FD240TCR is of the scroll type, mounted on anti-vibration mounts and equipped with an electrical resistance on the crankcase.
Degree of protection
Dehumidifier with IP21 protection, IP44 on request.
External unit
The remote condenser of this Fral dehumidifier is made with Ø 3/8” copper tubes and 0.1 mm thick aluminum fins. The tubes are mechanically rolled into the aluminum fins to increase the heat exchange factor. The geometry of these exchangers allows a low air side pressure drop value and therefore the possibility of using low-rev fans (with consequent reduction in machine noise). The fan section is made up of helical fans directly coupled to the electric motor with internal thermal protection and equipped with an accident prevention mesh. The motors all have IP 54 protection rating.
3 speed centrifugal fan
The fan mounted on the Fral FD240TCR is a three-speed centrifugal type with double suction . Made from sturdy galvanized sheet metal blades , the Fral dehumidifier fan is statically and dynamically balanced .
Hot gas defrosting
It allows the use of the dehumidifier in environments with temperatures up to 3°C , it is a special hot gas injection system to speed up the defrosting of ice formed in the evaporator.
Fral FD240TCR dehumidifier air delivery
The standard delivery of this Fral dehumidifier is placed on the side opposite the intake , but it is possible to request the professional dehumidifier in the Top version - with delivery on the upper side of the machine.
High efficiency washable air filter
Made of polyurethane , the Fral FD240 air filter is washable and easily replaceable. High efficiency filter .
Microprocessor
Controls the defrost cycles , the compressor timer and the alarm board. The FD240 model, being three-phase , is equipped with phase sequence control. The microprocessor of this dehumidifier is equipped with a 0-10 V output for modulating control (optional) or ON/OFF as standard for external unit control.
Easily visible control panel
Located on the side of the machine. Complies with European regulations.
Optional: Condensate lifting pump
On request.
Technical specifications
The Fral dehumidifier we are describing has a single-phase voltage of 400V , with maximum absorbed power of 4.3 kW and maximum absorbed current of 9.1 A. Silent dehumidifier for regulating and controlling humidity in the home and professional environments, the starting current LRA is 50.0 A , with a sound pressure level of 55 dB .
The refrigerant gas used for this model is R410a .
The operating range is from 7÷35 °C , with an operating range for relative humidity between 32÷35 °C , between 45÷70% .
The dimensions are 97 x 58 x 68 cm , for a weight of 110 +16 kg .
Condensed water at different temperatures
| DEHUMIDIFICATION | 10 °C - 60 % | 10 °C - 80 % | 15 °C - 60 % | 15 °C - 80 % | 20 °C - 60 % | 20 °C - 80 % | 25 °C - 60 % | 25 °C - 80 % | 26.7 °C - 60 % | 27 °C - 80 % | 30 °C - 80 % | 32 °C - 80 % |
| L/24h | 35 | 60 | 55 | 79 | 70 | 105 | 90 | 125 | 103 | 135 | 188 | 240 |
Air flow at different back pressures (mc/h)
Fields of application
- Swimming pools
- Archives
- Gyms
- Conservation
- Ironing shops
- Laundries
- Rental
- Hotels
- Industry
Accessories Available - On request
- Hot GAS defrosting
- Below 0°C Defrost
- Post-heating electric resistors
- Useful head 200 Pa
- Hot water battery
- 3-way ON/OFF valve kit
- Anti-corrosion painting evaporator
- Removable intake air filter kit for ducted version
- Version with 316 stainless steel body
- BMS control including duct humidity probe
- Monobloc version
- Remote Display Panel
Technical Data
| Power Supply | 400V |
| Average Power Absorbed | 3.7 kW |
| Consumption | 4.3 kW |
| Nominal Air Flow | 2000 m³/h |
| Max Absorbed Current | 9.1 A |
| Air flow rate at 1.5 mbar | 1600 m³/h |
| Max Dehumidification Capacity | 240 L/24 h |
| Noise | 55dB |
| Refrigerant | R410a |
| Condensation Drain Connection | 3/4'' |
| Relative Humidity T< 30 °C | 45 ÷ 99 % |
| Relative Humidity T 30 ÷ 32 °C | 45 ÷ 90 % |
| Relative Humidity T 32 ÷ 35 °C | 45 ÷ 70 % |
| Temperature | 7 ÷ 35 °C |
| Average Rated Power Absorbed | 7.7 kW (4 kW resistors) |
| Hot Water Heating Capacity (room 27°) | 5 kW (water 60/70 °C) |
| Mechanical Humidistat | YES |
| External Unit | YES |
| Copper Pipes | 3/8'' |
| Aluminum Fins | 0.1mm |
| Dimensions | 97 x 58 x 68 cm |
| Continuous Discharge | YES |
| Dehumidifier Weight | 110 kg |
| External Unit Weight | 16 kg |
Technical Data
| Power Supply | 400V |
| Average Power Absorbed | 3.7 kW |
| Consumption | 4.3 kW |
| Nominal Air Flow | 2000 m³/h |
| Max Absorbed Current | 9.1 A |
| Air flow rate at 1.5 mbar | 1600 m³/h |
| Max Dehumidification Capacity | 240 L/24 h |
| Noise | 55dB |
| Refrigerant | R410a |
| Condensation Drain Connection | 3/4'' |
| Relative Humidity T< 30 °C | 45 ÷ 99 % |
| Relative Humidity T 30 ÷ 32 °C | 45 ÷ 90 % |
| Relative Humidity T 32 ÷ 35 °C | 45 ÷ 70 % |
| Temperature | 7 ÷ 35 °C |
| Average Rated Power Absorbed | 7.7 kW (4 kW resistors) |
| Hot Water Heating Capacity (room 27°) | 5 kW (water 60/70 °C) |
| Mechanical Humidistat | YES |
| External Unit | YES |
| Copper Pipes | 3/8'' |
| Aluminum Fins | 0.1mm |
| Dimensions | 97 x 58 x 68 cm |
| Continuous Discharge | YES |
| Dehumidifier Weight | 110 kg |
| External Unit Weight | 16 kg |
INDORS is an Authorized Service and Repair Center
Our workshop is able to guarantee efficient and professional repairs: speed; of intervention, competence and availability are our strengths.
By purchasing from Indors you will also have purchased peace of mind: our Assistance and Repairs Service guarantees quick and timely solutions for any problem thanks to the safe availability; of spare parts, your equipment will always be efficient and available within a few days at a low cost. More information
EU Warranty 2 Anni
All products sold by Indors are covered by a legal guarantee of 2 years from the date
of purchase for purchases by individuals (12 months for professional users) for lack of conformity,
pursuant to art. 128 ff. Legislative Decree no. 206/2005.
More information
Our Reputation
