Comet KM Classic 6.15 15/170 T and Comet KM Classic Plus 6.15 15/170 T
The Comet KM Classic and KM Classi 6.15 15/170 T are professional three-phase hot water pressure washers designed for intensive professional use in industrial, artisanal, and automotive sectors. This professional hot water pressure washer combines compactness and high performance, with a nominal pressure of 150 bar and a maximum pressure of 160 bar with a maximum flow rate of 900 L/h , making it ideal for professional washing, industrial cleaning, and sanitizing heavily soiled surfaces.
COMET KM CLASSIC / PLUS features
- Ideal for Professional Use
- Low pressure detergent suction (Classic model)
- High pressure detergent suction with tank (Plus model)
- Standard pressure regulation (Classic model) or Flanged Valve (Plus model)
- Temperature control with mechanical thermostat
- Standard burner control with delayed start
- Maximum temperature 110 °C
- Anti-scale device (Plus model only)
The machine is available in light or dark gray, depending on stock availability. The technical specifications remain unchanged.
Equipped with a 4-pole 1400 rpm motor , delayed Total Stop and boiler with thermal protection , the Comet KM 6.15 15/170 T guarantees reliability, smooth starting and operational continuity even in the most demanding working conditions. The 18-litre diesel tank with float and temperature regulation make this professional hot water pressure washer a complete technical solution for expert operators.
Technical Specifications
The Comet KM 6.15 15/170 T Classic and Classic Plus is a professional three-phase 400V-50Hz pressure washer with a 5 kW power consumption and a 1400 RPM 4-pole electric motor. The Classic version is equipped with an LW-KM motor pump , while the Classic Plus version uses a ZW motor pump with a flanged valve, both designed for intensive professional use. The machine is equipped with an 18-litre boiler fuel tank , with a consumption of 5.5 l/h , and a 3.5-litre detergent tank.
In terms of performance, this professional hot water pressure washer works with operating pressures from 30 to 150 bar and a maximum pressure of 160 bar , offering a flow rate of 390 to 900 L/h with an outlet temperature of up to 110°C . The maximum inlet temperature is 60°C and the machine is supplied with a 10-metre high pressure hose , an ideal configuration for professional cleaning, industrial washing and continuous technical applications.
LW-KM pump (classic model)
The Comet LW-K pump is a high-performance professional pump designed for high-pressure washers intended for continuous intensive use. The brass head with high-efficiency stainless steel check valves and the integrated automatic regulation valve ensure pressure stability and immediate response to load changes. The industrial ceramic plunger pistons , combined with hardened stainless steel guide pistons and a double seal with Buna V-seals , ensure resistance to heat and abrasion and long operating life. The finned construction , the optimized oil bath and the oversized ball bearings maintain low operating temperatures even at high speeds, while the stamped bronze connecting rods with lifetime warranty and the 24 mm S male shaft make the Comet LW-K pump a reliable, stable solution suitable for professional transmissions in industrial and commercial environments.
ZW pump (Plus model)
The Comet ZW hot water pump is designed for professional and industrial applications up to 85°C , offering high reliability under continuous load. The brass head with one-piece stainless steel check valves , full ceramic plunger pistons , and Kevlar seals ensure resistance to wear, high temperatures, and chemicals. The large, reinforced crankcase , with increased oil capacity, improves lubrication and reduces operating temperatures, while the deeper fins optimize heat dissipation. The oversized industrial bronze connecting rods and 24 mm solid shaft make the pump ideal for professional transmissions and guarantee mechanical stability, long life, and consistent performance even under intensive use.
FUNCTIONAL Specifications
Low/High Pressure Detergent Suction
In the Classic model the detergent suction system takes place at low pressure with regulation from an external tank, while in the Plus model the detergent suction takes place at high pressure with regulation of the quantity from an internal 3.5 L tank or from an external tank.
Professional 4-pole motor
The Comet KM 6.15 15/170 T Classic and Classic Plus is equipped with a 4-pole 1400 rpm electric motor , designed for intensive professional use and prolonged work cycles.
Delayed Total Stop and Safety Valve
The delayed Total Stop automatically shuts down the motor when the gun is released, limiting wear, overheating, and fuel consumption. The professional safety valve protects the hydraulic circuit from overpressure, while the Classic Plus version features a flanged valve and ZW motor pump for advanced technical configuration for professional washing and industrial hot water cleaning applications.
Boiler system with thermal control and delayed burner start
The professional hot water boiler integrates thermal protection, a temperature control thermostat and delayed burner start , ensuring operational stability and precise control up to 110°C . The 18-litre diesel tank with level float and filling filter allows for continuous work during intensive professional cleaning operations.
Watch the Video
Characteristics
- 18 L tank with float and filter
- 4-pole single-phase motor
- Total Stop
- Delayed start of the nice burner
- Professional safety valve
- Boiler thermal protection
- Independent boiler ventilation group
- Professional Use
- Low pressure detergent suction
- LW-K pump (Classic model) / ZW (Plus model)
- Mechanical Thermostat
- Rotary switch for ignition
- Contactor and motor protection with amperometric control
- Door for pump pressure adjustment and for filter inspection and cleaning
- Low Diesel Warning Light
- Undervoltage Warning Light
- Phase Control Light
Standard Equipment
- Angled lance with cleaning head without nozzle - 0002-03413
- Delivery hose kit 10 m R1 5/16" - 10002-03598
- GH 301 + Swevel pistol - 00080-01044
- 1/4" MEG Flat Jet Nozzle - 00080-01376
Equipment on Request
- Hose reel with 15m high pressure hose
AlphabeticalBrands
Close