Hot pressure washer 300 bar Idropavese Special 300.18 XTL
Idropavese Special 300.18 XTL is a pressure washer designed for heavy-duty use with notable technical specifications. The materials used are of excellent quality , particularly resistant to impacts. The pump has a notable flow rate of 1080 L/h, thanks to the pressure of 300 bar and the water-cooled boiler , it is possible to carry out optimal cleaning even for a long time thanks to the high-performance pump group .
Technical specifications
Idropavese Special 300.18 XTL was born from thirty years of experience, the SPECIAL series is built with a water-cooled boiler which makes it suitable for particularly prolonged and heavy uses.
All this allows coupling with boilers with a high degree of pressurization with double and triple flue gas flow , maintaining perfect combustion and cleanliness of the boilers themselves with a relative decrease in the pollution rate . Idropavese Special 300.18 XTL is also equipped with the best safety devices .
Idropavese Special 300.18 bearings. Pump & motor coupling is direct, the XLT1830 Hawk pump is Made in Italy , has ceramic pistons and brass head , with separate bypass valve .
XLT1830 Hawk pump
The detergent kit is an optional , with detergent suction in AP and with fuel tank integrated into the structure. The boiler is positioned horizontally , the coil is made of steel and the float is electric with safety stop in case of lack of water. The Special 300.18
To further characterize this 300 bar pressure washer there is a bonnet opening safety device with instantaneous shutdown and finally, the SAT which is a timed automatic shutdown device.
Burner
The burner of this heavy-duty pressure washer stands out for the particular characteristics of the die-cast light alloy screw designed to allow accurate optimization of ventilation flows with consequent improvement in combustion potential and efficiency .
Control Panel
The controls of this pressure washer are particularly simple and intuitive , so that operator training times are significantly reduced ; this allows the operator to be trained quickly and the start of processing to be anticipated.
Pump group
the pressure washer is equipped with an XLT1830 Hawk Made In Italy pump, thanks to which remarkable performance is achieved. The flow rate of 1,080 L/h and the pressure of 300 bar , combined with the water-cooled boiler , make this pressure washer suitable for heavy-duty, high-intensity uses .
Reservoir
Wheels
Thanks to the two large wheels in addition to the two pivoting wheels , simple movements are allowed, even though the Idropavese Special 300.18 XTL has a weight of 230 kg .
Characteristics
- Operating pressure 300 bar, water flow rate 1080 L/h
- Pump group H132 hollow shaft V230/400/50 shaft diameter 24, flange 61, with 2 bearings.
- DIRECT pump and motor coupling.
- XLT1830 Hawk pump, Made in Italy
- Ceramic pistons and brass head
- Separate Bypass Valve
- Optional detergent kit, with AP detergent suction
- Fuel tank integrated into the structure
- Horizontal boiler
- Steel coil
- Electric float with safety stop in case of lack of water
- Diesel tank level
- Electronic flame control equipment with photoresistor
- Bonnet opening safety device with instant shutdown
- SAT automatic timed switch-off device
AlphabeticalBrands
Close