IPC HighPure HPE
Photovoltaic Panel Cleaning Machine

IPC HighPure HPE Photovoltaic Panel Cleaning Machine

IPC HighPure HPE is a photovoltaic panel cleaning machine that combines a high pressure pump with a series of water purification filters. The system generates pure water that can be used for cleaning the photovoltaic panels , through the combination of a reverse osmosis filter placed in series with a deionization resin filter.

The combination of the two filters makes it possible to produce extremely pure water up to 99.9% which has a high cleaning power on the photovoltaic panel (thanks to the absolute absence of limescale residues or other mineral compounds) and allows an extremely easy cleaning action as that the operator can carry out his duties of cleaning the photovoltaic panel systems from the ground, in extreme safety and with maximum practicality up to a "working" height of up to 20 meters, all with the use of light poles telescopic in carbon or glass fibre.

Benefits IPC HighPure HPE

The IPC HighPure HPE system, for cleaning glass surfaces and photovoltaic panels, reduces cleaning execution times by up to 75%: its field performance reaches 200 m² of surface in one hour and saves precious hours of work .

The IPC HighPure HPE reverse osmosis system is suitable for cleaning windows, stained glass and any other non-porous surface.

The machine is particularly suitable for washing and cleaning photovoltaic panels, for rinsing and cleaning boats, motorboats and boats which, thanks to this new technology, will return as bright and shiny as they just left the shipyards.

The IPC HighPure HPE photovoltaic panel cleaning machine leaves the treated surfaces perfectly clean and makes the life of the materials last longer.

Some IPC models also allow two operators to use the reverse osmosis machine at the same time, reducing the investment per workstation and doubling productivity.

IPC HighPure is different from other machines for cleaning windows and photovoltaic panels.

Indeed IPC HighPure HPE has

• highly effective in cleaning glass facades without using any detergent
• the ability to reach glass and panels at great heights and great distances without using ladders, scaffolding or platforms

Using IPC HighPure HPE it is possible to clean and operate up to 20 meters without scaffolding and ladders.

The extensions and accessories (telescopic rods and brushes, gooseneck ..) that can be used with the IPC HighPure HPE photovoltaic panel cleaning machine easily reach any surface even when there are obstructions and obstacles.

IPC HighPure HPE is the most practical and flexible equipment currently on the market for cleaning surfaces of photovoltaic panels and glass, cleaning solar panels, masts, aluminum, marble and any other non-porous material.

The system of water-circulating telescopic rods for washing photovoltaic panels allows you to overcome complex obstacles such as cornices, elements of street furniture or various obstructions, thus simplifying cleaning activities in compliance with safety, cost and accessibility requirements.

Watch the video

HPE HighPure IPC operation

The cleaning of the photovoltaic panels and the windows takes place in full respect of the environment , thanks to the reduced water consumption without the use of any chemical or polluting product.

The wastewater from IPC HighPure HPE is free of detergents and can be used for irrigation or dispersed via the sewer system.

High Pure is the most effective purification system on the market and uses 4 stages of filtration :

• Sedimentation pre-filter , removes particles larger than 5 microns from the water.
• Activated carbon pre-filter, eliminates chlorine which would otherwise cause damage to the membrane.
• Reverse osmosis membrane , eliminates 98% of impurities and salts.
• Cartridge with deionizing resins , removes the remaining 2% of salts, bringing their concentration to 0 ppm (parts per million).

The resulting osmotic and deionized water is 100% pure and is an extremely effective cleaning agent.

With a special instrument supplied, the “ TDS METER ” measuring total dissolved salts, the operator can verify the result of the filtration and control the cleaning power of the water produced.

The purer the water, the more aggressive it is towards dirt.

The combined use of pure water, sufficient pressure and a soft brush mounted on the extensions guarantee an always rapid and optimal result.

The Better The Water, The Better The Cleaning: the higher the degree of purity of the water, the greater its effectiveness and the persistence of the clear glass.

The purified water acts as a solvent on the dirt deposited on the photovoltaic panels and thanks to its bipolar nature it is able to combine with the charges (positive and negative) present in the dirt deposited on the surfaces, attracting and dissolving them inside: it is sufficient a light rubbing since rinsing with pure water collects and eliminates dirt and all residues, leaving the surface of the photovoltaic panels and windows clean and free of streaks and halos.

HPE - The version with 230V motor and 6 - 7 bar pump, which also allows the simultaneous use of two operators and a height exceeding 20 metres.

THE MACHINE IN DETAIL

1. Prefilter: activated carbon filter. Eliminates chlorine present in feed water. Chlorine damages the osmotic membrane, making it ineffective. The activated carbon filter can retain chlorine up to about 19,000 liters of water - 22,800 liters for the alternating current motor version, then it must be replaced. The level of impurities in the feed water does not affect the life of the filter.
2. Deionizing resin: After the water has passed through the Reverse Osmosis Membrane which removes 98% of the impurities present (3), the deionizing resin cartridge removes the remaining 2% of impurities from the water. The duration of this filter depends on the degree of impurity of the supply water and, consequently, on the level of salts dissolved in the osmotic water which passes through it (the membrane removes 98% of the total salts); on average it should be replaced after having filtered about 15,000 - 20,000 liters of water. To optimize the operation of HighPure, it is advisable to always check the purity of the water using the specific gauge supplied with the machine.
3. Reverse osmosis membrane. It is the membrane that removes 98% of impurities from the water, its replacement is foreseen after 3 - 5 years of use, depending on the degree of impurity of the feed water.
4. Engine (for versions equipped with 230 Volt engine)
5. Flowmeter: It is the counter that indicates the volume of pure water produced and serves as a guide for changing the filters.
6. Pressure gauge: Indicates the water outlet pressure.