BIEMMEDUE Jumbo 230V
Large Capacity Hot Air Generator

Biemmedue Jumbo Single Phase - Large Capacity Hot Air Generator

Biemmedue Jumbo hot air generators offer immediately available heat in a clean and economical way in various applications, such as in construction, shipbuilding, agriculture, livestock farming, industrial premises, sports and recreational facilities under tents.

These generators represent the top of the Biemmedue range in terms of power and thermal efficiency, providing an effective and prompt solution to problems caused by cold, frost and humidity.

They run on diesel, methane gas or LPG and have been designed with extreme care and manufactured to ensure reliability and durability even in the most adverse environmental conditions.

POWER AND MAXIMUM PERFORMANCE

The JUMBO series generators offer high-level performance in terms of both thermal power and efficiency:

• The combustion chamber, made of stainless steel resistant to high temperatures and the heat exchanger guarantee a high thermal output. The optimal ratio between the fuel burned and the calories expressed also results in operating economy.
• The helical or centrifugal fan ensures large volumes of hot air at high pressure and perfectly clean.

GREAT SECURITY

Biemmedue Jumbo generators have been designed and manufactured according to the highest international quality standards, in order to guarantee always reliable operation, in complete safety and simplicity:

• Automatic operation for maximum ease of use
• All generators are equipped with a FAN thermostat for automatic fan control, an automatic reset LIMIT thermostat and a manual reset LIMIT thermostat for safety shutdown in the event of accidental overheating or operating anomalies.
• The bodywork, thermally and acoustically insulated, is made of steel painted with epoxy powders and baked at 180°C, to ensure excellent resistance to corrosive agents.
• Maintenance is limited to a few periodic general cleaning operations of the components.

VERSATILITY

Available in floor, wall-mounted or trolley versions on large rubber wheels that facilitate movement, all models are equipped with large rings that facilitate attachment by cranes or forklifts.

• Equipped with a diesel tank, which increases their mobility in complete autonomy, they can also be used with generator power.
• The hot air can be delivered either from the front or the top of the appliances.
• A special switch allows the generators to be used for summer ventilation.

ACCESSORIES

A complete range of accessories allows adaptation to any environmental and construction site requirement

• pre-perforated sheaths for uniform heat diffusion,
• 2 and 4 way air delivery,
• flexible sheaths for air distribution in different rooms or floors,
• 4-nozzle plenum for direct diffusion

APPLICATION EXAMPLES

The characteristics of Jumbo generators make them ideal in a variety of sectors for application in temporary locations, occasional applications, emergency situations and stable uses.

• CONSTRUCTION AND BUILDING INDUSTRY : Drying of concrete products, drying of plasters, gypsum plasters, floors, etc.; maintaining frost protection in buildings under construction; heating of external workstations, workshops, canteens and construction site offices, etc.
• INDUSTRY AND CRAFTS : Heating of factories, workshops, car services, garages, laboratories, food and beverage warehouses, etc.
• EXHIBITIONS, RECREATIONAL AND SPORTS FACILITIES : Heating of exhibitions, circuses, tented sports and recreational facilities, etc.; heating of limited areas within large spaces.
• AGRICULTURE AND LIVESTOCK FARMING : Air conditioning of protected crops in floriculture and horticulture; heating of pigsties, stables, stables, breeding farms, mushroom farms, agricultural warehouses, etc.; drying of agricultural products.

Features Biemmedue Jumbo

• Burner cover drawer that allows protection from impacts, dust, water, atmospheric events and diesel/condensation collection tray
• Burner equipped with snorkel socket to ensure clean combustion air by connecting to an external suction sheath
• The new heat exchanger combined with the new higher performance fans allow for a thermal efficiency of 92÷93%
• Better anchoring of the machine's supporting structure thanks to sturdy fixing brackets that allow it to be moved on any surface
• Load-bearing structure with removable panels for internal washing, even with the machine hanging
• Panels with cross-shaped reinforcement folds to ensure greater rigidity and strength
• Use only metric screws and inserts for fixing, no self-tapping screws
• Protection of all elements subject to impacts, atmospheric events, etc.
• Fan protection (IP 55):
  • compliant with European directives ERP 2009/125/CE target 2015;
  • very quiet (noise ≤ 67 db at 2 meters);
  • 7 blades: high performance (air flow and static pressure) for the homogeneous diffusion of hot air through the sheath;
  • fan mouthpiece to convey air and ensure high static pressure;
• Rear control panel (IP 65):
• positioned on the rear part, it prevents contact with dust, water, snow, etc.;
• equipped with a sturdy metal cover which also allows for the storage of tools and documents;
• Front service electrical panel (IP 65):
  • positioned in the front part of the machine inside the burner cover drawer: to avoid contact with dust, water, snow for easier maintenance; for easier control and intervention by the operator
• Each main component (fan, burner, thermostats, etc.) is equipped with quick electrical connection connections:
  • speed of assembly/disassembly and technical intervention
  • Elimination of installation/disassembly errors

TECHNIQUE - HOW SAFETY THERMOSTATS WORK :

• Overheating thermostat: located on the combustion chamber, it automatically stops the flame in the event of overheating of the chamber.
• Ventilation thermostat: regulates the fan ignition when the combustion chamber is hot enough to avoid introducing cold air into the environment. Conversely, when the burner is turned off, it regulates the fan operating time in order to cool and exploit all the heat produced by the combustion chamber.
• Limit thermostat: located at the air flow outlet, it intervenes if the temperature of the air passing through the combustion chamber is higher than 100° C.

TECHNIQUE - HOW A PROFESSIONAL BURNER WORKS

A professional burner is composed of a fan, a high-filtering diesel filter, a fuel pump, a nozzle, an ignition transformer and a pair of electrodes that allow, even in the worst conditions:

• safe ignition even in dusty and humid environments without the risk of clogging the air filters;
• regular delivery of thermal power, even with very little fuel in the tank;
• pre-ventilation for combustion chamber washing;
• post-ventilation combustion chamber cooling;