BIEMMEDUE Phoen 110
Generatore Aria Calda

Biemmedue Phoen 110 Hot Air Generator

BIEMMEDUE PHOEN HOT AIR GENERATORS PROVIDE IMMEDIATELY AVAILABLE HEAT IN A CLEAN AND ECONOMIC WAY.

Characterized by the presence of a heat exchanger with flue connection for fume evacuation, they generate a thermal efficiency close to 90%. They are widely used in warehouses, horticulture and floriculture, livestock farming, construction, tents and mobile structures for drying, drying, thawing and heating.

When used in closed environments, the installation of a small chimney connected to the outside guarantees the evacuation of fumes. Phoen indirect combustion generators are versatile, reliable, simple to use and safe thanks to control devices which, in the event of a malfunction, cause the machine to stop.

MAXIMUM PERFORMANCE

The perfect combustion generated by an innovative dedicated BM2 burner allows for optimal air-diesel mixing, which combined with the use of a 4-pass combustion chamber, provides a thermal efficiency close to 90%. In fact, thanks to the increase in passage surface in the heat exchanger, the fumes are cooled more and therefore additional quantities of clean heat are generated.

INSTANT HEAT

Easy to transport wherever use is required, commissioning is immediate as is the production of hot air.

VARIABLE POWER

Using a switch located on the electrical panel it is possible to select the 1st Flame (75 kW) or 2nd Flame (110 kW) mode.
This operating flexibility allows you to:

• reduce consumption in applications where a low ∆T is sufficient;
• avoid frequent on and off cycles when you are close to the set room temperature, thus guaranteeing better thermal combustion efficiency.

BURNER

A feature that makes this series unique is the adoption of a dedicated BM2 burner, separate from the fan, replacing the traditional ones found on the market (Ecoflam, Riello, Lamborghini, ...) or the integrated systems used on economical machines where the combustion air is generated by the air of the motorized fan.

RELIABILITY AND SAFETY

The project derives from consolidated experience, the materials are carefully selected and the production strictly controlled. Maximum safety and minimum maintenance.

SIMPLICITY OF USE

All models are light and compact, equipped with handle, trolley and wheels, and have an essential and easy-to-use control panel. Due to the particularity of the filler it is extremely simple to top up the fuel.

COMBUSTION CHAMBER

The combustion chambers are all made of AISI 430 stainless steel with heat exchangers in aluminized steel for a better heat exchange with the cooling air and the use of the innovative combustion chamber with four smoke passes which allows the increase of the heat exchange within it with a consequent increase in the cooling of the combustion fumes such as to allow an efficiency close to 90%.

CONVEYOR FAN and FAN MOTOR

For better exploitation of the dynamic performance of the fan, a conveyor has been inserted which "intubates" the fan. This also provides safety protection in the event of machine maintenance .

ELECTRICAL CABLE SUPPORT

 A bracket fixed to the body allows the power cord to be rolled up during transport.

TANK DRAIN PLUG

On all models it is possible to drain the fuel inside the tank using a drain plug.

TANK CLOSING CAP

The tank cap is a professional type with bayonet closure.

FUEL TANK

The innovative design gives the machine a robust and compact appearance. The tank is made of steel which gives it high sturdiness and a high load capacity .

AIR REGULATION DAMPER

Thanks to a high adjustment range and a precise and functional graduated scale, it is possible to modify the combustion air flow, thus guaranteeing perfect combustion, depending on the altitude.

SAFETY THERMOSTATS

• Overheating thermostat: located on the combustion chamber, it automatically stops the flame in the event of the chamber overheating.
• Ventilation thermostat: regulates the switching on of the fan when the combustion chamber is sufficiently hot in order not to introduce cold air into the room. Conversely, when the burner is turned off, it regulates the operating time of the fan in order to cool and exploit all the heat produced by the combustion chamber.
• Limit thermostat: located at the air delivery outlet, it intervenes if the temperature of the air passing through the combustion chamber is higher than 100° C.

BM2 BURNER

A feature that makes this series unique is the adoption of a dedicated BM2 burner, replacing the traditional ones found on the market (Ecoflam, Riello, Lamborghini,...) or the integrated systems used on economical machines where the air combustion is generated by the air from the motor-fan. The use of a dedicated system resulting from years of study allows:

• Complete separation of the combustion air from that of the combustion chamber cooling fan: the combustion air is introduced into the combustion head via a flexible hose connected to the burner motor-fan.
  Advantages:
  • precise and complete combustion, with a CO (carbon monoxide) level of 0 ppm (parts per million);
  • possibility of managing the main fan separately and therefore automatically turning it on, to introduce air into the room only when the combustion chamber has been sufficiently heated by the burner;
  • use the machine for applications where only ventilation is required;
  • optimize and customize the burner to fully exploit the technical characteristics of the machine.
• Possibility of placing the components forming part of the burner in the optimal position for operation and maintenance for our applications.
• Avoid having functions and components that are redundant for our applications, but necessary for the operation of standard burners.
• Possibility to adjust the burner power depending on the applications without influencing the perfect combustion of the machine.
• Allow perfect combustion even in the presence of large changes in altitude.
• Possibility of taking the combustion air outside the environment in which the machine is positioned (snorkel connection).
• Possibility of ducting the machine with long sheaths (50 m) both in delivery and inlet without obviously affecting the combustion parameters.

FOAMED PNEUMATIC WHEELS

The use of foamed pneumatic wheels with bearings allows for easy movement of the machine, even in the presence of uneven, snowy or icy terrain. Furthermore, the foaming prevents the tires from deflating even in the presence of a puncture.

FUEL CIRCUIT

The diesel fuel supply pipes are made of rubber resistant to hydrocarbons, covered in reinforcing metal mesh, guaranteeing greater resistance to harsh climates and greater mechanical resistance to cuts and crushing. Furthermore, these hoses allow for safe attachment to the diesel pump, tank and filter by high-pressure crimping of the fittings.

TECHNIQUE

The combustion technology is based on the use of a professional burner composed of a fan, a diesel filter with high filtering power, a fuel pump, a nozzle, an ignition transformer and a pair of electrodes.
This allows, even in the worst conditions:

• safe ignition even in dusty and humid environments without the risk of clogging the air filters;
• the regular delivery of thermal power, even in the presence of very little fuel in the tank;
• pre-ventilation for washing the combustion chamber;
• post-ventilation for cooling the combustion chamber;
• the possibility of interfacing with a thermostat, humidistat or timer.