Base T-FORT MID B1603
S7S HRO CI HI LG FO SR
Waterproof Safety Shoes

Base Protection T-FORT MID - Extra water resistant safety shoes

The Base Protection T-FORT MID B1603 safety shoes are extra resistant to the penetration of water thanks to the upper in water-repellent greased leather with a 100% waterproof H2st0p membrane which, thanks to the heat-sealed membrane, seals all the seams preventing both the penetration of water that its accumulation between upper and lining.

These Base Protection CA-B1603-0WA safety shoes are part of the Fortex Line and are characterized by the HRO rubber tread with maximum resistance to slipping, to extreme temperatures and perfectly compatible with outdoor environments thanks to the tread pattern. The viscoelastic polyurethane midsole absorbs shocks and reduces vibrations while the presence of the V zone , a flexible area located in the middle of the sole, supports and facilitates bending.

Base Protection T-FORT MID complies with the S7S HRO CI HI LG FO SR standard guaranteeing:

• Antistatic sole
• Energy absorption in the heel area
• Metal Free anti-perforation sheet for 3 mm nails (Small)
• Hydrocarbon resistant sole
• Slip resistance
• Metal Free tip
• 200 Joule tip crush protection
• Sole resistant to contact with heat 300°C for 1 minute
• Cold insulation down to -17°C
• Heat insulation up to 150°C
• Sole with heel detached from the plant for grip on ladder rungs
• Water resistance according to WR and WRU standards

These Safety Shoes with Unisex fit with Mondopoint Man 12 and Mondopoint Woman 10.5 comply with the EN ISO 20345:22 standard.

Characteristics

• TOE CAP
  Slim cap
  
• SOLE
  Airtech Bi-density Pu/Hro rubber Life Plus technology
  
• LINING
  Smellstop - 3D technical fabric
  
• UPPER
  Water Repellent Greased Leather With H2st0p Waterproof Membrane
  
• INSERT
  Fortrex
• SIZES/SIZES AVAILABLE
  36-48
• MONDOPOINT SIZE
  12 (men's fit - sizes ≥ 39)
  10.5 (women's fit - sizes < 39)

Recommended area of use

• External, outdoors
• You work in extreme conditions
• Heavy industry
• Light industry
• Building
• Logistics
• Agriculture and livestock
• Extractions
• Crafts
• Large distribution
• Services

This original Base protective shoe features the following patented Base Protection® technologies:

H2St0p®

Extreme resistance to water-based fluids allowing to work in constantly wet environments . In fact, the heat-sealed membrane seals all the seams, preventing both the penetration of water and its accumulation between the upper and the lining which would make the shoe heavier.

OMNIA Dry'n Air® system

The Base Protection safety shoes with Dry'n Air System ensure an excellent thermoregulation capacity thanks to the simplified recirculation of the air present inside the work shoe. This innovative system pushes the humidity generated by sweat out of the footwear, improving the internal microclimate and the well-being of the foot, which remains dry and cool even in the presence of high temperatures.
The secret of this technology is a system of channels and holes, always free in an ergonomic insole capable of lifting the foot beyond the edge of the sole by distributing the weight evenly.

SlimCap

The Metal Free toe cap of this Base Protection shoe has a reduced thickness of 6.5 mm, 35% less than standard work shoes on the market. This toe cap also features a perfectly contoured toe cap designed to prevent soreness and pressure on the toes.

ForTrex® system

Patented system capable of guaranteeing extended protection, unsurpassed comfort, maximum flexibility, enhanced stability, superior cushioning, vibration absorption, robustness and durability thanks to the system of innovative technologies and materials thus promising total protection even during extreme work in harsh conditions .

Smell Stop® system

The 3D thermal fabric lining ensures maximum breathability while the permanent antibacterial system reduces the risk of infections and fungi by definitively counteracting the proliferation of bad smells.
The antibacterial treatment is effective throughout the life cycle of the safety shoes, performing a constant action.

Size Comparison Table

Guide to the correct interpretation of protection classes and standards

All safety shoes for professional use in accordance with EN ISO 20345:2022 are identified by the following wordings:

• SB (ex standard S0): Basic Protection
• S1 (ex standard 01): antistatic sole with energy absorption in the heel area
  • S1: They have no anti-puncture plate
  • S1P: They have anti-perforation plate in steel
  • S1PL: Have Metal Free anti-perforation foil for 4.5mm nails (Large)
  • S1PS: They have Metal Free anti-perforation plate for 3 mm nails (Small)
• S2 (ex standard 02): S1 + light impermeability given by an upper in leather (or similar materials) able to resist the permeability of water for max. 60 minutes.
• S3 (ex standard 03): S2 + anti-perforation plate
  • S3: They have anti-perforation plate in steel
  • S3L: Have Metal Free anti-perforation foil for 4.5 mm nails (Large)
  • S3S: They have Metal Free anti-perforation plate for 3 mm nails (Small)
• S4 : WRU water resistance
• S5 : S4 + anti-perforation plate
  • S5: They have anti-perforation plate in steel
  • S5L: Have Metal Free anti-perforation foil for 4.5 mm nails (Large)
  • S5S: They have Metal Free anti-perforation plate for 3 mm nails (Small)
• S6 : EXTRA Water Resistance (WR)
  • S6: They do not have anti-puncture plate
  • S6P: They have anti-perforation plate in steel
  • S6L: Have Metal Free anti-perforation foil for 4.5mm nails (Large)
  • S6S: Have Metal Free anti-perforation plate for 3 mm nails (Small)
• S7: S6 + anti-perforation plate
  • S7: They have anti-perforation plate in steel
  • S7L: Have Metal Free anti-perforation foil for 4.5 mm nails (Large)
  • S7S: Have Metal Free anti-perforation plate for 3 mm nails (Small)

Slip resistance classes - standard EN 13287 (2012):

• SRA : slip resistance with ceramic floor with water and detergent
• SRB: slip resistance with steel and glycerine floor
• SRC: SRA + SRB

Risk protection - standard 20345:2022:

P - Puncture resistant foil
E - Energy absorption from the heel
WR - Water Resistance
WRU / WPA - Upper resistant to water penetration
AN - Malleolus protection
M - Metatarsal protection
HRO - Sole resistant to heat contact 300°C for 1 minute
HI - Heat insulation up to 150°C
CI - Cold insulation up to - 17°C
FO - Hydrocarbon resistant sole
ESD - Protection from electric shock
A - Electrostatic footwear
C - Conductive footwear (electricity)
CR - Cut Resistance
SR - Slip resistance with ceramic floor with water and detergent and with steel floor and glycerine
DGUV112-191 - Orthopedic insole adaptation
SC - Toe Abrasion Resistance
LG - Sole with heel detached from the plant for grip on ladder rungs