Base K-START S1P HRO SRC
Safety Shoe

Base Protection K START - Work Safety Shoe B1004D

K-START B1004D Base safety shoes of the KAPTIV line with S1P HRO SRC Protection have an aluminum tip, capable of protecting the tip of the foot from 200 Joules , covered with an abrasion resistant tip designed to allow greater durability over time and wear of the footwear.
The sole is Bi-density PU/HRO rubber according to the i-daptive® Technology patented by the same brand Base Protection capable of heat resistance by contact at 300 °C for 1 minute .

With a seamless upper in technical fabric, the Kaptiv line is the first line of work shoes with dynamic comfort.

The SRC protection ensures slip resistance both in conditions of ceramic floor with water and detergent and with steel floor and glycerin. These work shoes are also equipped with a TPU insert for heel protection .

These original Base Protection Safety Shoes model K-START B1004D they are ideal for indoor use in the 4 seasons .
Compliant with EN ISO 20345:2012 standard .

Characteristics

• TOE CAP
  Aluminum resistant to 200J
  
• INSOLE
  Fresh'n Flex
  
• SOLE
  Bi-density PU/HRO rubber i-daptive® technology
• INNER LINING
  3D SmellStop technical fabric
  
• UPPER
  Seamless breathable fabric
• SIZES/SIZES AVAILABLE
  36-48
• MONDOPOINT SIZE
  11.5 (men's fit - sizes ≥ 39)
  10.5 (women's fit - sizes < 39 )

Recommended area of use

• Indoor, internal use
• Logistics sector
• Use Warehouse

This original Base protective shoe features the following patented Base Protection® technologies:

OMNIA Dry'n Air® system

The Base Protection safety shoes with Dry'n Air System ensure an excellent thermoregulation capacity thanks to the simplified recirculation of the air present inside the work shoe. This innovative system pushes the humidity generated by sweat out of the footwear, improving the internal microclimate and the well-being of the foot, which remains dry and cool even in the presence of high temperatures.
The secret of this technology is a system of channels and holes, always free in an ergonomic insole capable of lifting the foot beyond the edge of the sole by distributing the weight evenly.

Fresh'n Flex system

The BASE K-START B1004D shoe is equipped with a ballistic fabric insert with 0 mm perforation according to the EN ISO 20345:2011 standard.

i-Daptive® system

The i-daptive system manages to intelligently adapt to the different conditions of use to offer an incredible sensation of dynamic comfort by operating on several levels: stability even in extreme off-road conditions, easier walking and adaptation to the deformity of the ground.
This BASE K-START shoe cushions movements by gradually absorbing the energy produced by the impact between the foot and the ground, minimizing the shock sensation. Dissipates energy from the joints, restoring optimal biomechanical conditions and then returning energy at a speed compatible with foot movement. Furthermore, this technology stabilizes the foot by constantly bringing it back into axis during supination and pronation movements, benefiting the joints of the body.

Smell Stop® system

The 3D thermal fabric lining ensures maximum breathability while the permanent antibacterial system reduces the risk of infections and fungi by definitively counteracting the proliferation of bad smells.
The antibacterial treatment is effective throughout the life cycle of the safety shoes, performing a constant action.

Size Comparison Table

Guide to the correct interpretation of protection classes and standards

All safety shoes for professional use in accordance with EN ISO 20345:2022 are identified by the following wordings:

• SB (ex standard S0): Basic Protection
• S1 (ex standard 01): antistatic sole with energy absorption in the heel area
  • S1: They have no anti-puncture plate
  • S1P: They have anti-perforation plate in steel
  • S1PL: Have Metal Free anti-perforation foil for 4.5mm nails (Large)
  • S1PS: They have Metal Free anti-perforation plate for 3 mm nails (Small)
• S2 (ex standard 02): S1 + light impermeability given by an upper in leather (or similar materials) able to resist the permeability of water for max. 60 minutes.
• S3 (ex standard 03): S2 + anti-perforation plate
  • S3: They have anti-perforation plate in steel
  • S3L: Have Metal Free anti-perforation foil for 4.5 mm nails (Large)
  • S3S: They have Metal Free anti-perforation plate for 3 mm nails (Small)
• S4 : WRU water resistance
• S5 : S4 + anti-perforation plate
  • S5: They have anti-perforation plate in steel
  • S5L: Have Metal Free anti-perforation foil for 4.5 mm nails (Large)
  • S5S: They have Metal Free anti-perforation plate for 3 mm nails (Small)
• S6 : EXTRA Water Resistance (WR)
  • S6: They do not have anti-puncture plate
  • S6P: They have anti-perforation plate in steel
  • S6L: Have Metal Free anti-perforation foil for 4.5mm nails (Large)
  • S6S: Have Metal Free anti-perforation plate for 3 mm nails (Small)
• S7: S6 + anti-perforation plate
  • S7: They have anti-perforation plate in steel
  • S7L: Have Metal Free anti-perforation foil for 4.5 mm nails (Large)
  • S7S: Have Metal Free anti-perforation plate for 3 mm nails (Small)

Slip resistance classes - standard EN 13287 (2012):

• SRA : slip resistance with ceramic floor with water and detergent
• SRB: slip resistance with steel and glycerine floor
• SRC: SRA + SRB

Risk protection - standard 20345:2022:

P - Puncture resistant foil
E - Energy absorption from the heel
WR - Water Resistance (it is the improvement of the WRU)
WRU - Upper resistant to water penetration from 2023 WRU will be called WPA
AN - Malleolus protection
M - Metatarsal protection
HRO - Sole resistant to heat contact 300°C for 1 minute
HI - Heat insulation up to 150°C
CI - Cold insulation up to - 17°C
FO - Hydrocarbon resistant sole
ESD - Protection from electric shock
A - Electrostatic footwear
C - Conductive footwear (electricity)
CR - Cut Resistance
SRA - Slip resistance with ceramic floor with water and detergent
SRB - Slip resistance with steel and glycerine floor
SRC - Combination of SRA + SRB
DGUV112-191 - Orthopedic insole adaptation
SC - Toe Abrasion Resistance
LG - Sole with heel detached from the plant for grip on ladder rungs