Sparco Allroad MOTEGI S3 SRC
Safety Shoes 07529NRGF

Sparco AllRoad Motegi - Safety Shoes S3 SRC Protection

Sparco Motegi safety shoes from the AllRoad line ideal for both indoor and outdoor use thanks to the combination of Water-repellent Microfiber and Nylon together with a CrossGrip type sole in Phylon and Rubber to maximize grip and stabilization even on gravelly, muddy and snowy surfaces.
Furthermore, Sparco Motegi S3 SRC is able to absorb vibrations , preventing damage to the spine and lower limbs .

These shoes have S3 SRC Protection , which combines 200 Joule toe protection with waterproofing of the shoe and an anti-puncture blade in zero-perforation textile fiber. The SRC protection ensures slip resistance both in conditions of ceramic floor with water and detergent and with steel floor and glycerin. The insole is antistatic with ergonomic thermoregulation and monodensity PU sole with energy absorption from the heel .

These original Sparco safety shoes Motegi S3 SRC model are ideal for indoor use in the 3 seasons winter, autumn and spring and fully comply with the EN ISO 20345:2011 standard.
Furthermore, Sparco AllRoad S3 SRC consists of an upper in fine water-repellent microfiber combined with Nylon for both indoor and outdoor use and an internal lining in micro-perforated and breathable 3D fabric .

Sparco shoes use Teamwork® technology which optimizes the walking effort produced by the sole of the foot, where the greatest stresses are concentrated, returning 70% of the energy produced . Thanks to this technology, Sparco Teamwork safety shoes reduce the tiredness perceived at the end of the day, thus improving reflexes and attention to the dangers associated with slipping and stumbling. Furthermore, they allow for less walking effort and less stress on the back and spine together with relaxation of the muscles .

Characteristics

Guide to the correct interpretation of protection classes and standards

* highlighted it is possible to identify the characteristics that distinguish the footwear in question Sparco Motegi S3 AllRoad

All safety shoes for professional use in accordance with EN ISO 20345:2011 are identified by the following wordings:

• S : Safety Shoes (from the English word Safety)
• B : when followed by the letter S indicates Basic protection. These Mandatory Basic Requirements include the minimum indications to be respected regarding:
  • the height of the "split" leather upper which can also be opened in the heel area
  • the minimum length and bearing base of the tip
  • esimilar microfiber
  • front lining
  • insole
  • sole that can be in any type of material.
• P: Protective shoes with protective toe cap (from the English word Protection) safe against impacts with 100 J energy and 10 kN compression

As far as foot protection is concerned, footwear classified as "S" is in turn divided into:

• SB : it is the basic level of protection that is less protective than the other levels and is equipped with a 200 Joule steel toe cap for finger protection, meeting the main safety requirements of the EN 345 standard.
  
  
• S1 : S1 level shoes, in addition to the steel toe, also have an antistatic sole with energy absorption in the heel area. The shoes falling into this category are suitable for workers who are not particularly at risk and who do not foresee risks for the sole of the foot as this area does not have an anti-puncture plate. If you want to buy a shoe of this level but with an anti-puncture midsole, then you can choose the S1P version.
  Main features :
  - closed back (even in flat shoes)
  - Antistatic
  - FO: resistance to hydrocarbons of the sole
  - Energy absorption capacity of the heel
  
  
• S2 : this level, in addition to the characteristics of the S1, also has a slight impermeability given by an upper in leather (or similar materials) able to resist the permeability of water for max. 60 minutes.
  Main features integrated with the basic requirements :
  - Dynamic waterproofing of the upper material
  
  
• S3 : this is the most widespread level and combines the characteristics of the S1 and S2 levels (steel toe cap and waterproofing) in a single shoe, however adding the anti-puncture midsole (steel, fabric or kevlar) to protect the sole of the foot.
  Main features integrated with the basic requirements :
  - Anti-puncture plate
  - Sole with studs or tread pattern
  
  
• S4 : This is the most waterproof level ever, with 100% waterproof level in any outdoor condition and for unlimited time.
  Main features integrated with the basic requirements :
  - Antistatic
  - Energy absorption from the heel
  - FO resistance to hydrocarbons
  
  
• S5 : is the version of S4 with the addition of the anti-perforation plate
  Main features integrated to the basic requirements:
  - Anti-puncture plate
  - Sole with lugs or tread pattern

Slip resistance classes

Also with regard to the level of non-slip work shoes we have three different classes, all complying with the EN 13287 (2012) standard:

• SRA : slip resistance with ceramic floor with water and detergent
• SRB: slip resistance with steel and glycerine floor
• SRC: Slip resistance with both of the above conditions

Shoe classification based on risk assessment

Even the potential risks prevented by safety shoes are characterized by acronyms that identify which risk protection is ensured :

E = Heel impact shock
A = Electrostatic discharges
WRU = Upper resistant to water absorption and penetration
WR = Footwear as a whole resistant to water absorption and penetration
P = Perforation
FO = Hydrocarbons
I = Electrically isolated
CI = Cold
HI = High temperatures
C = Electrical conductivity
M = Metatarsus protected
AN = Ankle protected
CR = Cut
HRO = Heat by contact
ESD: Resistance to Electric Shocks