GVS Elipse A1P3
Mask for Vapors and Gases
Also Filtering Polyurethane Foams
or in 3 rates from 10.77 € with | ||
or in 3 rates from 10.77 € with |
Vapors, Gases and Dusts
HESPA A1P3 filter
0.3µm - TPE
GVS ELIPSE A1P3 SPR406 - Respiratory Protection against Gas, Vapor and Dust - Also effective against Polyurethane Foams
The Elipse A1P3 SPR503 Respirator is a GVS Respiratory Protective Mask designed to protect the airways from organic Dusts , Gases and Vapors that could cause serious lung diseases. This Respiratory Protection is also ideal for protecting yourself from dust, pesticides, paints, solvents in the automotive, construction, agriculture, shipbuilding and repair sectors.
The GVS Elipse A1P3 Respirator is equipped with a P3 type HESPA Filter ideal for Dust Protection together with the A1P3 Gas and Vapor Filter designed to protect against Pesticides, Paint Fumes, Molds and Solvents.
HESPA filters are GVS patented High Efficiency Water Repellent Filters and consist of 7 layers of filtering fabric that use exclusively mechanical filtration ensuring a minimum filtration of at least 99.95% of nano-particles even down to 0.04 microns.
Functional specifications
The compact design of this GVS SPR503 Protective Mask allows it to adapt perfectly to the face while maintaining a good field of vision and reducing the risk of non-compatibility between PPE. In addition, the GVS SPR503 Respirator features a large central non-return valve which minimizes the wearer's breathing resistance and the formation of moisture inside the mask.
The Elipse A1P3 SPR503 Goggle features lightweight, non-slip straps that can easily be adjusted to 4 positions designed for greater comfort and wet protection.
GVS Gas Filters contain activated carbon granules with particular characteristics related to pore size, grain size, activation level and the like. These features ensure high absorption performance and low breathing resistance for maximum comfort during use.
When the filters are full, simply replace them with replacement filters.
Filtering Mask Also effective for Polyurethane Foams
In addition to a course on safety and use, the use of a protective mask is mandatory for the user who uses polyurethane foams.
The A1P3 Elipse mask has also been specifically designed to effectively filter airborne particles and protect you from organic vapors resulting from polyurethane foams .
Technical specifications
The filter mounted on this Integral Protective Mask is of the A1P3 type for protection against organic gases and vapors with a boiling point > 65°C and also contain the HESPA P3 type protection (High Efficiency Synthetic Particulate Airfilter) which is a particular GVS patent designed to be able to retain micro-particles of Dust up to 0.04 microns with an efficiency of at least 99.95%.
In the Filter of this GVS Mask with replaceable filters there are Active Carbons with ABS cartridge.
GVS Elipse A1P3 SPR503 has a porosity of 0.3 microns and furthermore, it should be emphasized that all GVS Respiratory Protections comply with EN 140 and EN 143 standards and both the mask and the filters are CE certified where all products are 100% tested directly in production and made with traceable materials.
The measure of the Elipse A1P3 SPR503 Mask is M/L with dimensions of 93 x 128 x 140 mm and a weight of 258 g .
Duration features
The filters of the GVS protective mask can be used until they are clogged, which can be understood by the increasing breathing resistance.
In fact, the duration of the filters depends on the concentration of the pollution and on the type of activity being carried out.
The filtration level will always be greater than 99.95% for the entire period of use.
Shelf life is estimated to be approximately 3 years. The masks are supplied in an aluminum bag in which they must be placed after use to optimize the life of the activated carbons. The life of the dust filters can be increased by using the appropriate pre-filters (not supplied).
Areas of use
- Solvent Painting in Automotive
- Shipyards
- Repair shops
- Buildings
Characteristics
- Material TPE(Thermoplastic Elastomer)
- Filter A1P3
- Re-usable TPE capsule
- Nylon valve
- Porosity 0.3 microns
- 4 position anti-slip band
- For Gases, Organic Vapors and Dusts
- Size: M/L
Technical data
Code | SPR503 |
Porosity | 0.3 microns |
Protection | Nose, Mouth |
Mask material | TPE |
Valve material | Nylon |
Lens material | - |
Filter material | Pleated HESPA fabric |
Filter class | A1P3 |
Certifications | EN 140 - EN 143 |
Operating temperature | -30°C + 70°C |
Activated Carbon Filter Kit | Not included |
Dimensions | 9 x 13 x 14cm |
Weight | 260g |
Cut | M/L |
Technical data
Code | SPR503 |
Porosity | 0.3 microns |
Protection | Nose, Mouth |
Mask material | TPE |
Valve material | Nylon |
Lens material | - |
Filter material | Pleated HESPA fabric |
Filter class | A1P3 |
Certifications | EN 140 - EN 143 |
Operating temperature | -30°C + 70°C |
Activated Carbon Filter Kit | Not included |
Dimensions | 9 x 13 x 14cm |
Weight | 260g |
Cut | M/L |
INDORS is an Authorized Service and Repair Center
Our workshop is able to guarantee efficient and professional repairs: speed; of intervention, competence and availability are our strengths.
By purchasing from Indors you will also have purchased peace of mind: our Assistance and Repairs Service guarantees quick and timely solutions for any problem thanks to the safe availability; of spare parts, your equipment will always be efficient and available within a few days at a low cost. More information
EU Warranty 2 Anni
All products sold by Indors are covered by a legal guarantee of 2 years from the date of purchase for purchases by individuals (12 months for professional users) for lack of conformity, pursuant to art. 128 ff. Legislative Decree no. 206/2005.
More information
On Request Accessories