MO-EL Hot-Top
Design Infrared Heater
or in 3 rates from 160.00 € with | ||
or in 3 rates from 160.00 € with |
230V - 3.2 kW
IP55 - Internal
Without light
Basic equipment: Adjustable wall support
MO-EL Hot-Top - Infrared Wall Lamp Without Light
The MO-EL Hot-Top models are lightless heating lamps with a modern and refined design, ideal for indoor environments . The Hot-Top 9824 and 9832 heating panels, black in color at 2400W and 3200W , belong to the MO-EL Hot-Top range.
Totally Made in Italy , these infrared electric heaters are completely built in 6060 aluminium, with IP67 armored resistors and equipped with IP55 protection , which makes them invulnerable to atmospheric agents and time.
The MO-EL Hot-Top convector heaters exploit long wave radiation using anodized 6060 steel as the radiating element, to guarantee the best heating performance. Anodizing has a thickness calculated to reach the maximum emission temperature compatible with the life of the materials.
The heat emitted by long waves is a comfortable heat , which pleasantly embraces the irradiated area: it is therefore ideal for internal environments that do not require an immediate heat intensity, but a uniform and relaxing heat .
Below we show you how the 2400W model works, with a temperature that varies from 5°C to over 16°C depending on the proximity to the lamp.
The operation of the other Hot-Tops is shown in the table . Consider that, due to lower power, the surface heated by the Hot-Top Silver 9824S and 9832S is also smaller than the black 9824 and 9832 models .
MODELS | HEATED SURFACE | HEIGHT |
9824 | 3 x 2 m | 2 m |
9824S | SR < 3 x 2 m | 2 m |
9832 | 3 x 3 m | 2 m |
9832S | SR <3 x 3 m | 2 m |
The MO-EL Hot-Top hot air lamps, thanks to the collaboration between MO-EL and the University of Modena , are able to guarantee an area of warm well-being for people , in internal and external environments , transforming the maximum of heating energy in infrared rays without emitting light.
The design manages to combine the aesthetic taste with the functionality of this heating panel: between the infrared emitter and the bodywork, there are 2 layers of insulation and only 3 jumpers , in order to retain as much energy as possible on the emitter, avoiding wasting it upwards.
MO-EL Hot-Top convector heaters are environmentally friendly, due to their low energy consumption and zero emissions of gas or other toxic substances for humans and the environment. The body that makes up the product is entirely recyclable because it is made of aluminum and rock wool.
The adjustable wall bracket is included.
Characteristics
- Completely Made in Italy
- It doesn't emit any light
- Modern Spanish design
- Constructed from 6060 aluminium
- Anodized radiant part
- Degrees of Protection IP55
- High Effectiveness
- Homogeneous heating
- Long Wave Infrared Radiation
- For internal and external use
Models available
- Hot-Top 9824 - 2400W - Black
- Hot-Top 9832 - 3200W - Black
Equipment
- Adjustable wall support included
- Available in black and silver versions
Technical data
Hot-Top 9824 | Hot-Top 9832 | |
Power Supply | 230V | 230V |
Power | 2.4 kW | 3.2 kW |
Infrared radiation | Long Wave | Long Wave |
Degree of Protection | IP55 | IP55 |
Insulation class | the | THE |
Material | Aluminum 6060 | Aluminum 6060 |
Radiant Material | Anodized aluminium | Anodized aluminium |
Dimension | 155 x 20.1 x 5.8 cm | 195 x 20.1 x 5.8 cm |
Weight | 7.8kg | 9.8kg |
Color | Black | Black |
Technical data
Hot-Top 9824 | Hot-Top 9832 | |
Power Supply | 230V | 230V |
Power | 2.4 kW | 3.2 kW |
Infrared radiation | Long Wave | Long Wave |
Degree of Protection | IP55 | IP55 |
Insulation class | the | THE |
Material | Aluminum 6060 | Aluminum 6060 |
Radiant Material | Anodized aluminium | Anodized aluminium |
Dimension | 155 x 20.1 x 5.8 cm | 195 x 20.1 x 5.8 cm |
Weight | 7.8kg | 9.8kg |
Color | Black | Black |
On Request Accessories